Magnavox MDV560VR DVD/VCR combi

Progressive scan mode is used by DVD players to artificially scale standard resolution DVDs to HD resolution, usually 720i. Is your set capable of receiving HD resolution? If not, that is probably why you are getting the blue screen.

Please press and hold STOP button for more then 5 seconds to cancel Progressive Scan mode.

mi zenith xbv342 solo queda la pantalla azul y dice progressive scan mode como salgo de hay

with the dvd tray empty, press an hold the 'stop' button for 10seconds.

or

'setup', up, up, up, right, up, select

Your television probally does not support progressive scan mod. many do not.

f you accidentally set Progressive Scan to ON (within
Analog TV), press STOP 9 for five seconds to restore the
picture to normal operation.

Trun the DVD player on till you see the "progressive scan" screan. Hold the "stop" botton down for 5 seconds and the unit should reset to standard DVD play.

Worked for me, good luck.

Bill

to turn it off select connection method 3 above and progressive scanning mode, to set the mode, set progressive to off in the display menu so that the p scan indicator light on the front panel goes out. do all of this in interface mode. you can also do this by pressing and holding PLAY > on the front of the unit for more than 5 seconds, still watch for the p scan indicator to go off. this works best when the unit is connected directly to the television.

take the dvd out and hold the stop button on the dvd player for 5 sec (not the remote) the dvd player and that will work

Stuck in Progressive Scan Mode??? Remove the disc(s) from the changer, make sure TV is on Blue Screen...should say "Progressive Scan Mode".......Simply press and hold the stop button for 5-10 seconds and it will reset.