My dishwasher is not working and has an error code of F2. How can I fix this problem?

Hi Paul, the link below is a short youtube video showing you how to fix error code f2 on your dishwasher.....CHEERS..
https://www.youtube.com/watch?v=qP_X9iG0f-g

DIY Asko Dishwasher Repair Asko Repair Help - YouTube

? 1:25
www.youtube.com/watch?v=WsmpgDthFwM
Jan 20, 2011 - Uploaded by ApplianceAdvice http://www.ApplianceRepairLesson.com This video explains how to repair a flood error F2 on an Asko ...

The problem is with rotor assembly of the drawer that is causing the F2 error. Turn power off. Empty water using a small container and towel to dry base.


Remove the washer arm and drain filter sump cover. Twist the rotor at the base out from the socket gently but firmly.
Clean the cavity and check the rotor for damage. Put everthing back in and turn power on.If F2 does not go away then replace rotor.

F2 is an error for the dishwasher flooding. Go to the video below to see how to fix the problem

http://www.appliancerepairlesson.com/2011/01/20/diy-asko-dishwasher-f2-repair/

Good Luck

http://www.appliancerepairlesson.com

f1 = Flood Code

This means that the dishwasher most likely has a leak

There is a float switch in the bottom of the machine and when water gets down there it trips the code

F2 = Roter not moving

you can remove the basket and spray arm and pull the roter out and make sure its clean and give it a try.

f2 error code

drain plugged, hose kinked or discharge pump bad

The F2 problem in Asko dishwasher is due to the high water level condition.The reason is bad water pump or a defective water inlet valve. you should try replacing this and your problem will be fixed.

Maybe you dont have to remove anything else.. try the rotor from the bottom drawer first. If this works just buy a new rotor..

F2 flashes, and wll not stop runing. No water in pan. help