How can i change pets on pet pals for leapster explorer

If you're getting a new pet soon, it's the perfect time to start doing some pet-proofing. These preparations will protect your property and ensure your new friend is safe, healthy and happy. So, follow this proofing list and your pet will feel welcome and cozy at your home. Pet Friendly Home Remodeling Ideas AppraisalNewsCast

Some vacs have two belts. Is urs also self powered? If so, has a separate belt. With model # can give better info.

You need to take a look this online store for getting dog collars.
dog collars Luxury On Leash

Hi, it's Jeremy from Crucial Vacuum.

The Eureka Pet Pal requires Eureka U belts.

You can purchase direct your replacement belts from Crucial Vacuum with free shipping and an exclusive 10% coupon for Fixya.com readers, use code: FIXYA10

http://www.crucialvacuum.com/catalogsearch/result/?q=eureka+u+belts

I hope this was helpful. If you would like further assistance, please feel free to give us a call at 877.750.9239. We have helpful and friendly customer care representatives on the line ready to assist you.

Jeremy Lerner
Crucial Vacuum Customer Care
http://www.crucialvacuum.com

Hi Adriana,

I offer this link so you can explore a bunch of possibilities Google . Here is an Amazon link as well Amazon com super pet kabob Pet Supplies . I would cut the end. Splice through what you can, leave one less & tie knot with Para-cord. Hope this helps. Fare. Well.

Your child must earn tokens to get more treats and shampoo. Here is the link to the customer help desk about the same issue:
http://leapfrog.custhelp.com/cgi-bin/leapfrog.cfg/php/enduser/std_adp.php?p_faqid=2057&p_created=1276796344

its not recognizing the game, contact is probably dirty. take an eraser and rub the contacts of the cartridge and get them super clean, blow out ALL the debris and that should fix it.
good luck!

Unlike most vacuums, this one the screws are on the top of your base. There are two screws one on each side. When looking at the front of the vacuum right side screw is located above the s in 12amps and on the left side screw is located above the p in pet. Now keep in mind it's not directly above the letters look about 2 inches up. Unscrew them, take cover off. Once you have done that pull up on the brush rod. Maybe tough if ur vacuum has a lot of built up dirt. Next put belt on metal prong then put on brush rod. Place rod back in its spot, gonna need little bit of muscle. Then put top back on and replace screws. Plug in flip bottom just to make sure brush is spinning. If u have followed steps this should work. I hope this helped took me forever to find the screws because I have always had vacuum with them on the bottom and internet was no help to me. Good luck

hahahahaha eat knob