Hello. I recently purchased a Nuby teether. It's 3 colorful keys with gel inside. I washed it & gave it to my son & the gel leaked out of the green key. As you can imagine, i am not happy about this.... Is there something you can do for me? Thank you. Carol Shaw

Hello Ray,
Without a specific make and model to go by to help you better it makes it tough. Here is a general guide on how to fix it and you can purchase the needed parts here also.

Washing Machine Repair Help

Good Luck!
Rich Lilja

I have this as well. Put 200ml in for 5 min. keeps bottles sertilized for 3 hours, and if you keep them in the nuby sterilizer it will keep for 24 hours. hope this helps :)

If it has a blue cast someone likley turned up the blue brightness inside the TV...there are 6 knobs...2 for each color..try turning that down. Its not the PIP or bad tube...

Hello,

Go to the home page at:

http://unclemilton.com/

Here is the Ant Farm page:

http://unclemilton.com/ant_farm/

Hope that gets you going. Please take a moment to rate this solution.

Thanks for using Fixya.

Hi there you can try


1. Press the Menu & Mono start keys. Next press the up arrow key 4 times to make the machine enter the maintenance mode.

2. Enter 8 & 0 by using the up arrow key & SET keys.

3. Press the mono start key several times until the purge count appears on the LCD.

4. Enter 2 7 8 & 3 by using the up arrow key & set keys to reset the purge count to zero

5. Press the stop/exit key to return to the initial stage of the maintenance mode.

6. Enter 9 twice by using the up arrow & set key's to exit from maintenance mode




Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Hi there you can try


1. Press the Menu & Mono start keys. Next press the up arrow key 4 times to make the machine enter the maintenance mode.

2. Enter 8 & 0 by using the up arrow key & SET keys.

3. Press the mono start key several times until the purge count appears on the LCD.

4. Enter 2 7 8 & 3 by using the up arrow key & set keys to reset the purge count to zero

5. Press the stop/exit key to return to the initial stage of the maintenance mode.

6. Enter 9 twice by using the up arrow & set key's to exit from maintenance mode




Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Hi there you can try this not know if it will work for you but it works with some brother printers


1. Press the Menu & Mono start keys. Next press the up arrow key 4 times to make the machine enter the maintenance mode.

2. Enter 8 & 0 by using the up arrow key & SET keys.

3. Press the mono start key several times until the purge count appears on the LCD.

4. Enter 2 7 8 & 3 by using the up arrow key & set keys to reset the purge count to zero

5. Press the stop/exit key to return to the initial stage of the maintenance mode.

6. Enter 9 twice by using the up arrow & set key's to exit from maintenance mode




Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Hello you can try this it may be the problem

To reset waste tank full error in MP730.

1. Hit the "menu": Key
2. Hit "Copy" Key
3. Hit "#" Key
4. Scroll thru the menu headings until you come to "Test Mode" - 12th heading
5. Hit the "3" button- this will bring up Eprom Clear
6. Hit "0" button
7. Hit the "Stop" button

Can only try then your printer go on longer but some time the other you need to clean out the waste ink it inside the printer go to open up all.



Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.

All The Best: Pineworks

hello please try this

This works on the F30, F60, and F80.
Resetting the Waste Ink Volume Counter
1) Enter SERVICE MODE.---
By pressing Menu-Copy-#
2) Select TEST MODE.
3) Select [8] PRINTER TEST in TEST MODE.
4) Select 3. [EEPROM CLEAR].
5) Select 0. [INK COUNT].
6) Press the [OK] key.
7) Press the [Stop/Reset] key (returning to the state of 3)), and then press the [ON/OFF] key.

Skip step (6) since there is no [OK] key on F30 printers.
Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks