I have a samsung camera TL105 used to work good but now when I plug it in, add new hardware wizard comes up, and it cannot add camera, I cannot browse my pics but the pics are on the camera, later now it does not evewn detect the camera, when plugged in nothing happens now. I cant find a driver for it or software and just have the camera no cd or manual with it

Compatible with Samsung MV800 PL120 ST76 ST95, ST90, SL50, SL600, SL605, TL205, TL105, TL110, AQ100 and similar

You might need to have a computer administrator account to perform some tasks.
Most new devices your computer will recognise automatically. When your comp is running, plug in your new dvd player. Does it beep and say 'New Hardware added? If not then use
The Add Hardware Wizard which enables you to add new hardware or troubleshoot any hardware-related problems.
Open the Add Hardware Wizard

• To open the Add Hardware Wizard, click Start, click Control Panel, and then click Printers and Other Hardware. Under See Also, click Add Hardware.
• If it can't recognise the player, it gives you the option to select the correct make and model. Is yours on the list? If not, you may need to go to the Microsoft site and update the list of players.
• Do come back here if you need further help.

Please follow the steps given below to add the scanner using Scanner and Camera wizard.

1. Plug your scanner into your computer.
2. If your scanner is "Plug and Play," the "Scanner and Camera Wizard" starts or double-click add device. Follow the instructions on your screen.

Note:

1. To open "Scanners and Cameras," click "Start," click "Control Panel," click "Printers and Other Hardware" and then click "Scanners and Cameras."
2. If you have a "Plug and Play" scanner, Windows detects it and installs it automatically.
3. If your scanner is not "Plug and Play," follow the installation instructions that came with the device.
4. If your scanner is not listed in the "Scanner and Camera Installation Wizard," try to install it using device manager.
5. After you install your scanner, you can test it.

if the pc ...doesnt find the software ..you need to reinstall the software ...or run it manually ...so ...plug the camera ...insert the software ...and run the add new hardware wizzard ...when will prompt ya ...choose manually install and point the wizard ( browse ) to the disk drive ....it will find the software it needs and it will install i t...

WHEN YOU GO TO MY COMPUTER DOES IT SHOW UP AS A NEW DRIVE IF SO RIGHT CLICK ON IT IT SHOULD SHOW YOU YOUR PICTURES .IF THAT DOESNT WORK UNINSTALL YOUR CAMERA USING THE ADD REMOVE HARDWARE AND SHUT DOWN YOUR COMPUTER AND RESTART IT THEN RE-ENSTALL USING THE ADD/REMOVE HARDWARE RESTART COMPUTER WITH CAMERA ON IT SHOULD RECONIZE IT

I think I know what the problem is, first off the computer must be able to communicate with the
camera/device irregardless of the drivers. The camera is plug and play and so is the computer
unless you are using an older version of windows like 98 or 98 second edition. If you are 98 etc load
the old drivers. But if you are 2000, millineum, or xp then the drivers are automatic for the usb ports.
The panasonic dmc-fz7 is kind of a freak in that it is not a true plug and play device. Sometimes
you have to declare the new hardware. It may have once worked but for what ever reason the hardware may not jive with what the pc thinks it sees if anything at all.
Solution: Go into the Control panel , add hardware wizard, with the camera hooked up to the usb
port and the camera turned on. In the device manager you should get the appropriate message, "new hardware detected" actually it should say dmc-fz7 etc. From there it should be apparent that things are working normally....Good luck. Probably a power glitch or who knows. Mostly its a problem with panasonic plug and play software which they corrected a year or so later with the newer cameras...

i need to down load my logiteck notebook cam driver please

This is a solution for error code 41 but it may assist you with your problem.

A driver was loaded but Windows cannot find the device. This error occurs when Windows does not detect a non-Plug and Play device.

If the device was removed, uninstall the driver, install the device, and then click Scan for hardware changes to reinstall the driver. If the hardware was not removed, obtain a new or updated driver for the device.

If the device is a non-Plug and Play device, a newer version of the driver might be needed. To install non-Plug and Play devices, use the Add Hardware wizard. Click Performance and Maintenance on Control Panel, click System, and on the Hardware tab, click Add Hardware Wizard.

On the General Properties tab of the device, click Troubleshoot to start the Troubleshooting Wizard.

Good luck.

Here is the explanation and solution for the error code 41:

Code 41
Windows successfully loaded the device driver for this hardware but cannot find the hardware device. (Code 41) Recommended resolution

A driver was loaded but Windows cannot find the device. This error occurs when Windows does not detect a non-Plug and Play device.

If the device was removed, uninstall the driver, install the device, and then click Scan for hardware changes to reinstall the driver. If the hardware was not removed, obtain a new or updated driver for the device.

If the device is a non-Plug and Play device, a newer version of the driver might be needed. To install non-Plug and Play devices, use the Add Hardware wizard. Click Performance and Maintenance on Control Panel, click System, and on the Hardware tab, click Add Hardware Wizard.

On the General Properties tab of the device, click Troubleshoot to start the Troubleshooting Wizard.

Good luck.

PC does not recognize player - sure you used the right driver?

Code 41Windows successfully loaded the device driver for this hardware but cannot find the hardware device. (Code 41)Recommended resolution

A driver was loaded but Windows cannot find the device. This error occurs when Windows does not detect a non-Plug and Play device.

If the device was removed, uninstall the driver, install the device, and then click Scan for hardware changes to reinstall the driver. If the hardware was not removed, obtain a new or updated driver for the device.

If the device is a non-Plug and Play device, a newer version of the driver might be needed. To install non-Plug and Play devices, use the Add Hardware wizard. Click Performance and Maintenance on Control Panel, click System, and on the Hardware tab, click Add Hardware Wizard.

On the General Properties tab of the device, click Troubleshoot to start the Troubleshooting Wizard.