Garden Logo

Related Topics:

Posted on Apr 26, 2011
Be the first to answer

HOW TO INSTALL HINGES CD160R ON SWINGING DOOR

Answer This Question

3 Related Answers

Anonymous

  • 619 Answers
  • Posted on Jan 25, 2008

SOURCE: Kenmore MT0305342 electric dryer, currently

Hi , it can be transfer to left side , as long having design holes nut attached to screw the door.

Ad
co7196

Ned C Cook

  • 3433 Answers
  • Posted on Nov 21, 2009

SOURCE: door hinge is broke so door swings open all the

As long as it closes and seals, not to worry.

Anonymous

  • 15935 Answers
  • Posted on Sep 05, 2010

SOURCE: water leaking from shower door

Thanks for your question!

I'm sorry that you haven't received an answer yet.

The response rate on FixYa FREE questions is usually over 80%, but sometimes questions go un-answered when:
1. the question is unclear, incomplete, or poorly worded...
2. the question is mis-categorized - so the correct experts aren't viewing it...
3. the question requires an answer for something that cannot be explained online adequately...
4. specific training, tools, or equipment are required to avoid injury or death...
5. the Experts that are online simply don't have the resources to answer your question fully...

Please feel free to re-work your question if you feel one of these may be the reason.
Of course you are not required - but converting your question to a PAID one usually increases the reply rate as well.

Normal rates for FixYa are...
$ 9.99 answer for one question.
$12.99 Live Real-Time online chat or premium e-mail support.
$29.99 Live Real Time phone support
Sometimes FixYa will run specials for unlimited questions via monthly subscription or reduced rates for limited periods.


Consider the savings that can be had when an informed Expert can save you a $100 service call, or a $350 trip to the car dealership.
Your problem solved - guaranteed! Or your money back!!

If you don't want to pay - feel free to re-submit your question so it returns back to the top of the work queue if you still need help.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for helping with your FREE question

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How do I install the flap stay hingr
The installation process of a flap stay hinge may vary depending on the specific model and design of the hinge, but here are some general steps to follow:
  1. Determine the location where you want to install the flap stay hinge. Make sure that it is the correct size and shape for the flap or door that you are installing it on.
  2. Mark the location for the hinge on both the flap or door and the frame or support structure that it will be attached to.
  3. Drill pilot holes in the marked locations. The size of the pilot holes should be slightly smaller than the screws that will be used to attach the hinge.
  4. Attach the hinge to the flap or door first, using the screws provided. Make sure that the hinge is flush with the edge of the flap or door.
  5. Hold the flap or door up to the frame or support structure in the desired position, and then attach the other side of the hinge to the frame or support structure using the remaining screws.
  6. Test the flap or door to ensure that it swings smoothly and is properly aligned.
  7. Make any necessary adjustments to the position of the hinge or the screws to ensure a proper fit and alignment.
  8. Once you are satisfied with the position and alignment of the hinge, tighten all the screws securely.
  9. Test the flap or door again to make sure that it opens and closes smoothly and securely.
It is important to follow the manufacturer's instructions for your specific flap stay hinge model to ensure proper installation and avoid any damage or malfunction.
Read full answer
Mar 17, 2023 • Refrigerators
0helpful
1answer

How do I change the door swing on a Miele T1515 Dryer?

Changing The Hinging Over - Miele heat pump dryer ...

 www.manualslib.com > manual > Miele-Heat-Pump-Dr...
Miele heat pump dryer Manual Online: changing the door hinging, Changing The Hinging Over. You Can Change The Door Hinging On This Tumble Dryer ...

VIDEOS as well

https://www.google.com/search?q=change+the+door+swing+on+a+Miele+T1515+Dryer

..

Read full answer
Jan 16, 2021 • Miele Dryers
0helpful
1answer

I have a Miele T1515 Dryer. I want to reverse the door swing from left hinged to right hinged.
Lots of help here in text and videos

https://www.google.com/search?q=change+the+door+swing+on+a+Miele+T1515+Dryer

..
Read full answer
Jan 16, 2021 • Miele Dryers
0helpful
1answer

Replace front door Pontiac vibe
THIS IS A TWO PERSON JOB!!
Open the door wide for access. Get a look at each hinge and see if the bolt heads are accessible. If not it will involve stripping door trims and possibly front fenders.
If you can get to the hinge bolt heads, first remove the door check strap across the centre line of the door. This will allow you to swing the door a bit wider making access easier. Wind the window down a short distance as a handle. Then,
SUPPORT THE WEIGHT OF THE DOOR!
Slacken the LOWER hinge bolts leaving them in loosely to act as a brake if the door drops.
Start to remove the bolts in the upper hinge. Get your helper to support the door as it starts to swing loose. Take out the loose upper and lower bolts and remove the door.
To refit the new door, get your helper to hold it in position while you install the top bolt in BOTH hinges. Then install the lower bolt in each hinge. Tighten all bolts to the correct torque.
Lastly, refit the door check strap and close the door to check it lines up.
Read full answer
Jan 12, 2018 • Pontiac Cars & Trucks
0helpful
1answer

How do i remove the driver side door on an 02 cavalier, 2 door? what tools do i need?
Hi Sarah:
When you open and close the door you will see that it swings on hinges.
If you look at the hinges you will see that they are attached to the car and the door with bolts.
Swing the door open and place blocks under it (or floor jacks) to support it, then undo the hinge bolts. Do the botttom hinge first.
You'll also probably have to disconnect some wires if there are any electricals.
Doors can be heavy so don't drop it.
Also, don't drive the vehicle without having a drivers door installed.
Cheers.
Read full answer
Oct 09, 2015 • Cars & Trucks
0answers

Do i have to purchase new door hinges to change the swing of the doors or will exiting hinges work to make the change???
Read full answer
Be the first to answer Jul 27, 2015 • Samsung RB215ACBP 20.0 cu. ft. Bottom...
0helpful
1answer

Remove oven door from hinges
the door is removed with the hinges in place. with the door open, lock the hinge sections together with the little clips on lowest hinge section. When locked, lift up on the door (not the handle) sides, swinging it up until it can be pulled out. Install in reverse order.
Read full answer
Feb 17, 2014 • Thermador Ovens
0helpful
1answer

I always get confused as to the door swing direction and I need to replace one of the handle sets. Before I order I need know if it is a right or left hand door. Can you help?
Yes, Here's how. It's all about the hinges. Facing the door from the outside, if the hinges are on the left, and the door swings to the inside, it is a left hand opening door. If it swings in with the hinges on the right, it would be a right hand opening door.
Best regards, --W/D--
Read full answer
Jan 28, 2011 • Garden
3helpful
1answer

Is it possible to reverse door swing on dryer? My daughter has a new Elite front load dryer that swings from left.
REVERSING DOOR SWING
 Your dryer is designed so the door swing may be reversed at any time without additional parts. Conversion is accomplished by transferring hinges to the opposite side of the cabinet.
To change the direction of the door opening:
 1. Open the dryer door. Remove the four hinge hole plugs from the left side of the door opening. Place nearby for future installation. NOTE: You may need a plastic knife to help pull out the plugs. Be careful not to scratch the paint.

2. Remove the four screws that secure the door hinges to the dryer front panel (see below). NOTE: Remove one screw from each of the two hinges first. Hold the door firmly before removing the last two screws.

3. Rotate the door 180° and reinstall the door hinges to the dryer front panel with the four screws.

4. Install the four hinge hole plugs in the open screw holes on the right side of the door opening.

Hope this helped Tim
Read full answer
Dec 01, 2010 • Kenmore Elite HE4 Electric Dryer
2helpful
1answer

Can the door swing be changed?
Yes the door can be changed to open from the opposite side, there are removal plugs that need to be removed from the opposite side and just change all the hardware from one side to the other, change the middle hinge first and put on the bottom door first, after its is mounted you can put the bottom part of the top door on the hinge and last the top hinge, and just make a few minor adjustments.
Read full answer
Apr 16, 2010 • Amana ARB1917CSR Bottom Freezer...
Not finding what you are looking for?

View Most Popular

Garden

Related Question

How do I install the flap stay hingr

  • Refrigerators

75 views

Ask a Question

Usually answered in minutes!

Popular Questions

Kawasaki engine dies after running 20-30 minutes

Stanley 36 in. 20 HP Kawasaki FS600V...

The stanley garage door opener Model 3220.51 is

Stanley Garden

Stanley 10-801 utility knife. How

Stanley Garden

Stanley backpack sprayer top is stuck....... how do I get it off?

Stanley Professional Backpack Poly...

I have plaster walls in

Stanley Garden

Top Stanley Garden Experts

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66949 Answers

Larry Ng
Larry Ng

Level 3 Expert

14591 Answers

Stan Ford

Level 3 Expert

3131 Answers

Are you a Stanley Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...