How do I set the clock on the oven - Rangemaster 110 (Gas) Kitchen Range

You do not need the clock I removed it and wired the oven direct.The wires are easy to get at when the front panel is removed. If you look at the manuals on line they will guide you with the correct wires to use

you have to push 2 of the buttons at the same time. usually - and + for 3 seconds. you will see the display change. good luck.

Instructions

1. • 1

     Check the oven to ensure that it is off and that the timer isn't running. The buttons used to set the clock are the same buttons that adjust the oven, and you may end up making unintended adjustments to the oven.
     

   • 2

     Press the "Clock" button to enter the clock setting mode. The LCD will show the current time set on the oven.
     

   • 3

     Use the "Set Temp/Time +" or "Set Temp/Time -" buttons to adjust the clock to the current time. Depending on your model of stove you may need to use the "Hour," "Min" or the "Temp/Hour" up and down arrow buttons to set the time.
     

   • 4

     Save the new clock setting by pressing the "Start" button. Depending on your stove model, you may need to press the "Clock" button a second time if the "Start" button does not work.
     

Read more: How to Set the Clock on a Whirl Pool Stove ' eHow.com http://www.ehow.com/how_5692616_set-clock-whirl-pool-stove.html#ixzz1H3Wfexf6

Typically all you have to do to set the clock is to press the Clock button, enter the time, and press Clock again. However on some models, clock set is accessed through the main menu, by pressing the Help button and following the prompts.

power to the main oven has to go through the oven clock if time is not set main oven will not work also if clock set on auto time rather than manual oven will not work conversley if clock is faulty it will not work top oven is unaffected as oven clock auto timer cannot be used on top oven.try resetting power of and on again reset time on clock if clock not faulty oven will now work.

if you are having trouble setting the clock times etc this is probably down to a worn bit generator this is the knob you turn to set the time they get dirty when using oven or grill and wont operate properly,the clock will need changing im afraid as there no way to open the clock without destroying it.

hope this helps

Hello, I think I have the same oven as you, and yes the oven doesn't seem to work unless the clock has been set.

On my oven, there are 4 buttons and a dial below the digital clock.
To set the clock, you need to turn the dial whilst holding any two of the 4 buttons down.

For me it's a two handed job.

Cheers,

Michael

You can download your owner's manual free here.

From the manual:

SETTING THE CLOCK - When the microwave oven is plugged into an outlet, the oven will display " 0:00 "

1. Press the CLOCK button; the hour digit will blink
and the clock indicator will light.

2. Press the number keys to set current hour.

3. Press the number keys to set current minute.

4. Press AM/PM to choose AM or PM.

5. Press the CLOCK button again; the display will
show the present time. After the clock has been
set, the time will appear with blinking colon,
unless the oven is cooking or defrosting.

NOTES:

- To reset the present time in the display window when the oven is off, press the CLOCK button and
reset.

- If you make a mistake when setting the time, press the STOP/CLEAR button.

- To recall the actual time while the oven is cooking or defrosting, simply press the CLOCK button
and the display will show the actual time for three seconds.

We're happy to help and we appreciate your thoughtful rating of our answer.

you need to replace the clock timer board..