MX-500 My stereo tech installed my system in my living room with speakers in my Kitchen, Office and outside. I have FOUR Universal Remote MX-500 each programed individually: Living Room (Main) - 4 speakers are working. Is programmed with TIVO & Direct TV. Kitchen -2 speakers used to work but can't find button to turn on. Office - 2 speakers used to work but need button to turn on. Outside - 2 speakers used to work but need button to turn on. Programmer did not leave any instructions. I've Tried AMPWR and P-PWR on the Main remote and tried to turn on each other set of speakers with designated remote - but no luck. Please advise. Marcy [email protected] 310 306-6962

Check to see if there is a way to adjust the balance for the speakers or set individual volumes for each speaker.

0056,0038,0029,0017,0039. Check these codes. If you wish to get more setup codes, three digits, four digits or five digit ones, check this link. Pull up older posts. Setup code list and proceedings to some popular model remote control are given.

If you have a MX-500 use your origional remote to teach the MX-500 the codes.

The best place to go when in need of advanced programming for any universal remote or control system is Total Control Remotes - www.total controlremotes.com. They offer great services and can program any MX-60000, MX-5000, MX-3000, or any other type of advanced remote control. They also offer lifetime services that cover you in the event you have any future programming needs - free of charge!

Best of all, they do not even need to come out to your residence to program it in most cases. Give them a call at 8483337337 or email [email protected].

If you have a learning universal remote, such as the MX-500, just put the remote in learning mode, press the button on the universal remote you want to program then press the appropriate button on the other remote. Otherwise, we'll need to know also what remote control you have. They are not all alike.

Hi Jimmy, we do programming for several types of universal remotes all across the country. Once a client visits our site, www.totalcontrolremotes.com, and fills out a new customer form and downloads, fills out, and emails us their configuration we can give them a quick estimate, eta, and mail them back a configuration file. We also are unique in that we offer a lifetime contract for changes made in case the customer adds or subtracts equipment, has channel lineup changes, wants something else set up, etc. We provide many graphical, simple to use and most of all enjoyable custom designs.

Visit our website www.totalcontrolremotes.com for more details. We will be glad to help you with any of your programming needs and do quite a few MX-6000, MX-3000, MX-980, MX-950, MX-900, MX-880, all the way down the line. We also do many other types of remotes as well and I am sure you will find our pricing very reasonable.

Thank you,
Vincent
Total Control Remotes
www.totalcontrolremotes.com
Universal Remote Programming & Advanced Control Systems

The MX-500 has a learning mode that you can use. Press MAIN and ENT together for 3 seconds, then press the P-PRO button. Select the device then button you wish to program on your remote and then with both remotes facing each other (IR ports must be able to communicate) press the button on your other remote.

You can also download a copy of the book here...
http://www.universalremote.com/resources/pdfs/MX500manual.pdf

I would suggest you use the learning mode and teach your remote from the remote that came with the Sony

you really have to contact the tech who installed your system...because he was the one who programed your remote

You cannot access the bass settings with the remote. The remote that comes with the DWM-2500 is Sanyo Part #RB-TS760MT