How to fixed drive error windows 98 when i start

SE should boot on it's own without the use of the floppies. Try it by changing the boot sequence.

You may want to run chkdsk on the hard drive to fix any errors. Use the fix switch on syntax.

Hello marlynsantos. You are experiencing a Windows 98 Drive error.
The Solution could be getting a new Driver. (DVD/CD) I would also recommend upgrading your computer. Windows 98 is pretty old. You can find Drivers on ebay.
I hope this helped!

http://service1.symantec.com/SUPPORT/nav.nsf/pfdocs/2003020714354306?Open&docid=2003020714354306&nsf=nav.nsf&view=pfdocs

To run the Microsoft Windows Installer if Norton AntiVirus was installed from the CD

1. Insert the Norton AntiVirus CD into the CD-ROM drive.
2. Do one of the following:
   • If the installation program appears, then click Browse the CD
   • If the installation program does not appear, then double-click the My Computer icon on the Windows desktop, and then double-click the CD-ROM drive icon.
3. Double-click the MSI folder.
4. Do one of the following:
   • In Windows 98/Me, double-click the WIN9x folder.
   • In Windows 2000/XP, double-click the WINNT folder.
5. Do one of the following:
   • In Windows 98/Me, double-click the Instmsi.exe file.
   • In Windows 2000/XP, double-click Instmsiw.exe if you have Windows 2000/XP.
6. In the next dialog box, click Yes.
7. After the rollback has finished, then reinstall Norton AntiVirus.
   Follow the instruction in Reinstalling your Symantec program after a failed installation or after you see error messages to start the computer without any programs running on startup and then reinstall your Norton program.

If these steps do not fix the problem, then go on to the next section.

To run the Microsoft Windows Installer if Norton AntiVirus was installed from a downloaded version

1. On the Windows taskbar, click Start > Find (or Search) > Files or Folders.
2. Ensure that "Look in" is set to the drive where you downloaded Norton AntiVirus, and that "Include subfolders" is checked.
3. In the "Named" or "Search for..." box, do one of the following:
   • In Windows 98/Me, type the following:
     
     instmsi.exe
     
   • In Windows 2000/XP, type the following:
     
     instmsiw.exe
     
4. Click Find Now or Search Now.
   You might see many files with this name. Look for the file with this name that is located in either the Symantec_Norton_AntiVirus_2003 or the your Windows temporary file location depending on your version of Norton AntiVirus.
5. In the Search Results window, do one of the following, depending on your version of Windows:
   • In Windows 98/Me, double-click Instmsi.exe.
   • In Windows 2000/XP, double-click Instmsiw.exe.
6. In the next dialog box, click Yes.
   This will undo the changes that were made to your system during the first failed installation.
7. After the process finishes, then reinstall Norton AntiVirus.
   Follow the instruction in Reinstalling your Symantec program after a failed installation or after you see error messages to start the computer without any programs running on startup and then reinstall your Norton program.

if you reload windows you will lose all of your files...try system restore from the command line in safe mode ...In SAFE MODE>START>RUN type MSCONFIG and enter in the general tab on the bottom there should be LAUNCH SYSTEM RESTORE

hi! there,set up exe. that was when your setting up win 98 you have to install that came from floppy disk before you can install win 98.there is an os win 98 in your system you have to delete that previous os before installing another win xp.restart ur computer. press F2 to open your bios set-up . then select bios set-up priority your cd-room drive second,your hard drive. last, quit and save set-up. and then your computer will restart. insert your cd windows xp then reinstall your window xp. delete the previous os then follow the set up on your window xp until you install your new window xp.

try using a scandisk command...or re-install the OS carefully

My suggestion is to follow up with the rest of us and install XP.. XP OS is so much more stable than 98... Upgrade a little bit on the hardware-front, and get XP...

Simple problem you made the partions using FAT 16 file system and 80 GB cannot be partition using win98 10 will limit the disk to 10 GB.
Remove all Partions And Use Windows XP to create partition during Installion.

Fix Ya

Best Of LUCK.

you have version 2.0 or earlier of the Iomega Tools software installed on the Windows 98-based computer, you may receive the following error message after you start your computer: Error loading dll, scsint.dll
Cause:
This issue occurs because the Windows 98 version of the Iomega Tools software is not compatible with Windows 2000 and Up Operating System.

To resolve this issue, upgrade the Iomega Tools software, known as IomegaWare, to the most recent Windows compatible version of the software from the following Iomega Web site:

http://www.iomega.com

You need to re-install Windows 98, and this time, you should do it on a separate hard disk partition.