Ignitors continue to pop altho all four knobs are in off position Kitchenaid gas stove top Model #KGCT305X Serial #XB2806974 ir X52606974

Hi,
Here is a test you can use to check the ignitors, Ignitor test. I also would like to you turn the thermostat knob slowly from the off position, When do you hear the click in the knob? You should hear it before the warm or lowest numbered setting on the knob. If you don't, replace the thermostat as it has failed. Need full model number to get you part.
Good Luck
Stay dry out there!!

I’m happy to help further over the phone at https://www.6ya.com/expert/gere_bf68e6055dd61249

You must have electricity for that unit. The ignitors are electric and so are the valves.

Your parts list is here:
http://www.kitchenaid.ca/assets/pdfs/literature/Repair%20Part%20List%20-%20W10315513.pdf
Installation instructions are here:
http://www.kitchenaid.ca/assets/pdfs/literature/Installation%20Instructions%20-%20W10247296.pdf
Owners manual is here:
http://www.kitchenaid.ca/assets/pdfs/literature/User%20Instructions%20-%20W10182518A.pdf

Hopefully this is what you wanted.
If none of the links work use this link:
http://shared.whirlpoolcorp.com/product_literature/search_results.jsp?searchTerm=WMH2175XVT&siteCd=WHRCOM&userType=Servicer and then type your model number on the search window. Do not use dashes in the model number and exclude the last digit if nothing comes up.
Thanks for choosing FixYa,
Kelly

at the top, above the ram, there are two switches. One is the reversing switch (should have 4 wires), the other is the stop switch (2 wires). I suspect that the switch arm is bent, due to what you just described, and fails to activate the switch to stop the motor when the ram is at the top position.

There should be a switch at all the valves. If only one is shorted it will do what you describe.

Hi,

Here is a tip that I wrote that will help figure out why the burner spark keeps on clicking...

Gas Range Repair Burners Keep on Clicking

heatman101

Hi,
Here is a tip that I wrote that will help you with that...

http://www.fixya.com/support/r4033033-gas_range_repair_burners_keep_clicking

heatman101

that would be you ignition sparker. have it replaced

This is almost certainly a blown high voltage diode.

Please reply back with your brand and model number so we can help you.