Lenovo 3000 C200 Notebook Logo
Posted on Aug 09, 2008
Answered

Error 0701: USB Over Current On HC/Port - Bus:00H Dev :1DH Fun:01H / Port:00H

I've been using the laptop without any problems untill i encountered the folowing ERROR: AArrgg!!!@#$

************************************************
Error 0701: USB Over Current On HC/Port - Bus:00H Dev :1DH Fun:01H / Port:00H
Error 0701: USB Over Current On HC/Port - Bus:00H Dev :1DH Fun:02H / Port:00H

Press F1 For Setup, Press F12 For Boot Device Selection Menu
**********************************************

Well, F1 takes me into the Bios, all looks well. And F12 Does nothing. how ever i tried to boot from CD-drive but of no use, i tried to solve it million methods but invain i couldn't if any one has a solution for this please provide i'll be very thankfull

thanks in advance
srini

Answer This Question
  • 6 more comments 
  • Anonymous Aug 20, 2008

    i have same problem pl repl on my email add [email protected]

  • Anonymous Nov 10, 2008

    i have the same problem on toshiba satellite a100

    help me at [email protected]

  • aj_7poohlago Nov 12, 2008

    am having the same prob with compaq presario 5000! annoying..

  • luje89 Dec 29, 2008

    i have the same problem with toshiba(error 0701 )twice, please help me, i need to have my comp. allright, else i couldnt finish my programming work. can anyone help me? my mail is [email protected]

  • CHINNAPATRA Dec 30, 2008

    same pbm with lenovo 3000Y500 pc....same as srini...my mail id is [email protected]

  • naveengopal Feb 04, 2009

    Error

    0701: USB Over Current On HC/Port - Bus:00H Dev:1DH Fun:00H / Port:00H

    Will go only to BIOS Nothing sees to be wrong

  • Anonymous Feb 05, 2009

    I have same problem with my laptop acer aspire 5560. Could anybody help me to resolve this problem. Please email me at [email protected].
    Thanks you...

  • Anonymous Apr 10, 2009

    My notbook dosent start it shows
    USB over current on HC/Port;
    Plz some one solve it ?

×

2 Answers

Anonymous

Level 1:

An expert who has achieved level 1.
Corporal:

An expert that has over 10 points.
Mayor:

An expert whose answer got voted for 2 times.

  • Contributor 1 Answer
  • Posted on Sep 19, 2008
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.
Corporal:

An expert that has over 10 points.
Mayor:

An expert whose answer got voted for 2 times.

Joined: Sep 19, 2008
Answers
1
Questions
0
Helped
14001
Points
16

Anonymous

Level 1:

An expert who has achieved level 1.
New Friend:

An expert that has 1 follower.

  • Contributor 1 Answer
  • Posted on Sep 17, 2012
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.
New Friend:

An expert that has 1 follower.

Joined: Sep 17, 2012
Answers
1
Questions
0
Helped
14001
Points
1
Ad

1 Related Answer

Anonymous

  • 94 Answers
  • Posted on Oct 29, 2008

SOURCE: hardware problem - not booting into windows

tosrisri hello,

If you have a VISTA DVD, please insert it, and use the BIOS to boot through your CD.
Then, when the VISTA installation comes up, press repair. Restart, and try again. Please report back.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0answers

Usb over current
Read full answer
Be the first to answer Jul 24, 2013 • Toshiba SATELLITE A100-TA2 LAPTOP LCD...
0helpful
1answer

Cannot connect with webex
"Over current" means you are drawing too much current from that port. If you have several USB devices attached at the same time it may be that you have too many and the system cannot supply the current needed. OR your machine isn't putting out enough current. Try unplugging everything but what you absolutely need.
Read full answer
Jun 23, 2013 • Microsoft Windows XP Home Edition
12helpful
1answer

Error 0701: USB Over Current on HC/Port
Error 0701: USB Over Error 0701: USB Over Current On HC/Port - Bus:00H Dev :1DH Fun:01H / Port:00HCurrent On HC/Port - Bus:00H Dev :1DH Fun:01H / Port:00H
Read full answer
Sep 28, 2010 • Lenovo 3000 C200 Notebook
0helpful
1answer

Error 0701 problem in lenovo laptop 3000 c series and N
Try turning on the computer in safe mode and turn on the computer by pressing f8 and see if that works. check in the bios if the cd drive is detected make sure that the disk you put in cd drive is a bootable disk
Read full answer
Jan 09, 2010 • Lenovo 3000 N100 Notebook PC
0helpful
2answers

Rror 0701: USB Over Current On HC/Port - Bus:00H Dev :1DH Fun:01H
youre probably turning it off wrong. you have to manually press shut down and wait for it to be fully shut.
Read full answer
Jun 29, 2009 • Lenovo 3000 C200 Notebook
0helpful
2answers

No bootable device found.try reseating hard drive,error code 0141
Make sure you fixed the HDD properly..In some cases you need to push a little harder. See if any pins had been bent, if so straighten it, without breaking it.
Read full answer
Jun 07, 2009 • Dell Inspiron 1525 Notebook
7helpful
2answers

0701 usb over current on hc/port error
I had the same problem on a toshiba satellite u400.
Usb over current on port ... blabla..
Please press F1 to resume or F12 to install.
F1 just ended up in a screen asking to press F2 or F12 which did nothing.
F12 did nothing.

Rebooting the pc ended in a black screen with a flickering HD symbol.

To be able to boot again on the BIOS I had to remove the battery and disconnect the plug.
Once It restarted booting on the error USB over current.

Si I took a USB mouse and tried to boot with the mouse plugged in on port , then another ... at the third port the PC booted normally with no error :)

Don't have any idea why it became faulty but it's now solved for me.
Read full answer
Mar 12, 2009 • Toshiba Satellite A135-S4527 Notebook
3helpful
2answers

Error 0701: USB Over Current On HC/Port - Bus:00H...
Try connecting your USB peripherals through a mains powered hub.
Read full answer
Dec 02, 2008 • Lenovo 3000 C200 Notebook
0helpful
1answer

Hardware problem - not booting into windows
One of your usb ports is either damaged or has an object stuck in it causing a short. Unplug all usb devices and look at each port. Note if one looks slightly different from the others. There is a plastic tab that fits into usb plugs. If this tab is bent and touches the side of the port, it can cause the short. If this is the case you may be able to either clean out or bend back the bent tab.
Read full answer
Sep 08, 2008 • Lenovo 3000 N100 0768 - Pentium Dual Core...
0helpful
1answer

Hardware problem - not booting into windows
tosrisri hello,

If you have a VISTA DVD, please insert it, and use the BIOS to boot through your CD.
Then, when the VISTA installation comes up, press repair. Restart, and try again. Please report back.
Read full answer
Aug 09, 2008 • Lenovo 3000 C200 Notebook
Not finding what you are looking for?

View Most Popular

3000 C200 Notebook

  • Computers & Internet

Related Question

Usb over current

  • Toshiba SATELLITE A100-TA2 LAPTOP LCD SCREEN 15.4" WXGA GLOSSY CCFL (SUBSTITUTE PART NO.) (22099297598)

Related Topics

14,011 views

Ask a Question

Usually answered in minutes!

Popular Questions

Battery problem-plugged in, not charging. Lenovo

Lenovo 3000 N100 0768 - Pentium Dual...

Lenovo bios password

Lenovo 3000 C200 Notebook

Conexant Cx20561 @ Intel 82801IB ICH9 - High Definition Audio

Lenovo 3000 C100 Notebook

Drivers for Lenovo Y410 for Windows 7

Lenovo 3000 Y410 Laptop

How to use NOVO button of Lenovo Laptop. Actually

Lenovo 3000 Y410 Notebook

Check Out the Mobile Browsers Report
Check Out the Mobile Browsers Report

View all Fixya Reports

Top Lenovo Computers & Internet Experts

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1212 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Lenovo Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...