Setting time on black dice guru watch - Black Dice Industries Black Dice Guru White LED Rubber BD04401 Watch for Men

Any tip from this video?


Black Dice Watch

BLACK DICE GURU Multifunction LED Watch

If no tip, look if box has any URL address to contact manufaturer. You can ask also in the shop where you bought it.
Sorry... I couldn't find any Weppage on internet related to a watch manufacturer producing Black Dice watch

What happens when you pull out the button when viewing the white face?

if the watch as not been worn for a long time it's best to wind it by hand first to get it started, just make sure the winder is pushed all the way in and then just keep winding it clockwise till it start going..

Hi, you need to find the little black "set" button which is located on the right side of the watch between the two functioning buttons. its very little. Press it once with like a needle or a pen tip (because you cant reach it with your fingers). You can then set the time.

I lost my manual guide for my police watch 12898J. I need a guideline how to set the time and date on the watch.

You need to open watch case back using appropriate tools. There are two batteries in this model - one for each watch movement. Unscrew/un-clip battery contact. Memorize polarity (+ and -). Take the battery to your nearest watch battery shop or watch repair shop and buy the same one. Fit new battery back in watch (remember polarity!). Fit back contact as it was. Close the watch case back. Set the time. Done.

Button are bottom left A, top left B, top right C, bottom right d.

Mode button A, cycle through the various features of the watch.

Stop on the feature you wish to modify, press and hold B until the display flashes, repeated presses of B will toggle through the time/date options. Use C and D to increase or decrease the values. When done, either do not press anymore button (10 seconds display will return to default) or Press A to choose another mode.

Once you get the hang of it, you will be a configuration guru. I have a similar type watch. The function of the A,B,C,D may not be exact, but they function in the exact same way.

Good luck and don't forget to vote.

I have the same problem with the xinjia-686. These instructions posted for another digital sports watch worked for me.

davidtolond
Rank: Guru Expert
Rating: 85%, 400 votes
I have the AW21312W, which has 4 buttons:

1. Light (Top left)
2. Mode (Bottom Left)
3. Start/Stop (Top Right)
4. Lap/Reset (Bottom right)

To turn the set alarm off, push buttons 3 and 4 at the same time, the alarm icon should appear or disappear

To turn off the hourly chime, press button 4. While holding it down, press button 2 and the days of the week disappear. The chime is now off. If you want the chime, press button 4 and hold while you press button 2. When all the days show, the chime is on.

This watch has the time set automatically by a radio signal. Leave the watch in a windowsill overnight whichever direction would face Denver Colorado. At 2am, and again at 3am, it will attempt to make radio contact and automatically set your watch! All you'll have to do is to set the correct time zone. Good luck, and let us know if this worked for you.

It looks like you've been pulling the crown halfway only.
When you pull out crown to the first click - watch is in day/date setting mode.
When you pull the crown further out (second click) - watch is in time setting mode.