Hi, I have this particular phone as my work phone, The extension name is "craig" which comes up on the screen, This was the previous guy that was here before me. How do i change it to my name?

I"d start by pressing the Caps Lock button on my keyboard to ask a question and use that key marked Shift to capitalize the first letter of a sentence and proper names.

Extension names are programmed in SYSTEM programming. Access to that is done from the phone connected to the first extension in your system, usually 101, with a system password. In a TA Series, it's program 604. In some others, it's program 004.

Carl

Hello and Welcome to FixYa!
GPRS settings for HTC Android mobile to access internet. Tap Start > Settings > Wireless & Networks > Mobile networks > Access Point Names > New:

• Name: bsnlnet
• APN: bsnlnet
• Proxy: blank
• Port: blank
• User name: blank
• Password: blank
• Server: blank
• MMSC: http://bsnlmmsc.in:8514
• MMS Proxy: 10.210.10.11
• MMS Port; 8080
• MCC: 404
• MNC: 71

If you have any further queries, please do not hesitate to comment again. If this solution was helpful to you, kindly rate it.
Regards, Waqar.

The recording of the name you hear announced during the transfer is the recording that the particular mailbox owner has recorded. If that mailbox owner has not recorded a name then you will hear a system prompt of the extension number. Access that mailbox as the owner and you can record a new name for the mailbox. This is easiest if done from that mailbox owners phone, you will need the password for the mailbox if password protection is enabled. Once in the mailbox it will play any new messages then follow the prompts to get to user options.

When you enter in the password the screen won't display any input. When the correct password is entered then the screen will change to terminals&sets. If entering 266344 at the password prompt doesn't change the screen, then try 23646 as an alternate password.

If you are using this phone on a Panasonic KX-TDA 30/100/200/600 system. From the Switcboard / Main telephone or Managers phone with the handset on the cradle/hook press Program * * or Program * # followed by the system password ( default is 1234). Now press 004 and then ENTER. Enter the extension number you want to change. Now enter the name (the same way as texting on a cellphone) To save the changes press AUTO DIAL / STORE. To go to the next extension press NEXT on the screen. When you are done lift the handset and put it down to exit program mode.
PLEASE rate/vote this answer if it was helpfull.
THANK YOU

you would need to enter program mode and in MB 4-18 enter the correct names for each port(extension). ldtsnj.com

it depends on the phone system type. The name changes are done in programming mode. But to enter programming varies by system. You need tech support.

hey do you know how to change the display names or better still do you know where i can get hold of a user manual for the DTU 16d nec phone thanks

In ASA give the command
change station extension#
you will get a station screen,In Name field
Name: _______________
give the name which you want to display for a particular extension user.
then press F3 to save
When that particular extension user called then you will see mentioned name.

how to name extentions