NAD T-763 receiver. cannot get surround sound. all speakers work. should the 7.1 and or surround be connected to the receiver and what else. stereo works fine....two front speakers, in stereo mode. zero for surround and 7.1 please advise.

Need help hooking up my surround sound speakers with receiver ...

www.hometheaterforum.com/.../286294-need-help-hooking-up-my-surr...

Sep 1, 2009 - 4 posts - ‎1 author
Ok I have a brand new set of Genesis G-6.1 surround sound speakers (I got them for $20 brand new in the box so I ... Or do I just connect all the speakers to the receiver like usual? ... Elite Audio EA-608 ... Genesis G-6035 Olin Ross - Beginners, General Questions & HTiB (Home ...
3 posts
Apr 7, 2009
Info. on Genesis 6.1 Home Theatre system - Beginners ...
1 post
Jul 24, 2008
Can't hear the bass sound... - Receivers/Separates/Amps
10 posts
May 30, 2008
Davinci audio? - Speakers, Subwoofers & Headphones
19 posts
Aug 28, 2006
More results from www.hometheaterforum.com

Have any universal codes for EA-6035 5.1 A/V Surround ...

Could be DC voltage on the speaker output line, but this will generally keep your receiver audio output turned off completely. Could be a bad muting transistor or microprocessor IC(computer within your NAD). If you are interested in having your NAD repaired, please visit my website at audioserviceclinic.com.You may contact me there. Thank you..

The selector chip is not working, either there is no B+ to the ic or the chip has malfunctioned or one of the surrounding components dead, for this type of problem a schematic will be needed to track the problem. try www.nad.com contact customer support and the technical department for additional help.

Checker speaker wiring on back for shorts, if okay! the audio drivers and outputs are highly suspect, at this point I suggest a serviceman because of the complexity of the surround sound system.

You have to get into the NAD's On Screen Display and set it up (SUB ON) to direct bass to the SUB pre-outs.

Pgae 16 and so n.

http://www.sweetwater.com/forums/showthread.php?10128-Tascam-CD-RW5000

http://www.retrevo.com/support/B%26W-AS1-Speakers-manual/id/22258bh730/t/2/

marvidson,
With the NAD model that you have and its lack of component or HMDI switching, the only way is to connect your system, sort of, backwards.

The only way to do it is to connect your digital cable box and blueray player directly to the tv, then the audio output from the tv to one of the video inputs on the NAD. The NAD has digital coaxial and toslink inputs so if your tv has one of them as an output, that would give you the best sound to the NAD. If your tv does not have either of those outputs, then you will be limited to the composite outputs (red and white) but that will still give you good sound.

Also, depending on the digital output to input configuration, you could possible find a converter online.

-Chris

try to calibrate the speakers from audessy rom menu,i did it and it lokes like it just needed to register all the channels,hope it helps.

Reseated connections inside Amp. so far center channel is working, also plan to replace banana plugs used to connect speaker wires to Amp.

HI,
I had the same problem and AH reset did not work. IS there anything else i can do?
Thanks
Adrian

Nice Receiver!
>In your surround sound settings make sure the levels are set correctly and the distance from your listing point to the furtherest
speakers are set to accommodate the levels etc.
>How many speakers 5.1, 6.1, or 7.1 (1meaning subwoofer)
>Pro-Logic supports 5.1 but not sure about 6 or 7
>Pro-Logic II does support all
>Make sure you are hear the sound from all sometimes the sound is really faint if you are in surround mode

Thank You and good luck