At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
If these pinholes are white dots that do not go away, then more than likely the chip is going out. This will only get worse not better. This is usually sold as a unit and not just a chip itself.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
First sign to a player strating not to work correctly.
You should stick in the small hole in the lid a staigtened clip. Push and it will start opening. For some time it will open having a CD/DVD in player thought you should start saving for a new player
Buy a dowel pin the size of the hole in the cabnet then use carpenters glue to glue the dowel pin in place where the old hole was make sure it is a good tight fit. Next saw off the dowel pin and let set over night then drill a strating hole in the dowel pin and reinstall the door works like a chanp. Hope this helps.
If there is a top motor mount over radiator remove the bolt that holds it to the radiator support, on that same mount you will see a hole in the bottom of the strate part of the mount just rock engine a head and insert bolt thru that hole and the hole on support and it will hold engine a head so its easier to get to the back plugs.
Hi,
I can understand the problem in the unit so to over come this problem you have to reset the unit .When you reset the unit surely the unit will show your current location address and also it will not recalc the route.
Follow the steps to reset the unit :
****************************************
On the left hand side at the lower bottom coner you can see a small pin hole there named as reset .Just insert a paper clip in to the hole when the unit is on.this is the way to reset the unit......
wait for a few seconds, then tap on screen when it asks for. Align it, cut-paste, then it should do.
or if it stucks on first screen only, then put your stylus to reset hole to perform a soft reset.
×