We have misplaced the instructions to convert our storkcraft aspen crib to a toddler bed

Hi!

As lots of cribs-stage from Storkcraft, your bed instructions are permanently attached on the board, below the mattress. And for the almost beds, the mattress frame has to be purchased separately, to convert it to a full size bed.

If you would like to have the copy of yours instructions, go to http://www.storkcraft.com/products.aspx?cat=cribs-stages to find your model and save its instructions in pdf in your computer. Good luck!

It converts from a crib to a daybed, by taking the front sliding rail completely off. The rail will slide up out of the groove.

Hope this helps.

Per the companies website (storkcraft.com) it doesn't look like the Ariel is a 3 in 1 but a 2 in 1. The manual is here
http://www.storkcraft.com/docs/all/04588-43.pdf
and it mentions converting to a twin bed, but not to a toddler bed.

Possibly put the mattress all the way down and remove the smaller side rail for a 3 sided toddler bed. Make sure the frame is sturdy enough without the 4th side.

Vancouver-based manufacturer Stork Craft is voluntarily recalling more than a million baby cribs in Canada and the United States over a potential suffocation hazard.
The cribs were manufactured in Canada, China and Indonesia between May 2000 and November 2008, the company said in a release.
About 494,000 of the cribs were sold in Canada and 535,000 in the U.S. in several retailers such as Wal-Mart, Kmart and J.C. Penny, as well as on several websites, including Amazon.com, Babiesrus.com, Costco.com and Walmart.com, the U.S.Consumer Product Safety Commission said in an advisory Tuesday.
You can call them to see if your model is one of them. They aren't listing them...you have to call for a replacement. Sorry.

i think this is the same crib that i have. I remove the front rail that slides up and down, then i removed the plastic contraptions that allow it to slid up and down on. I then attached the bed frame on the lowest setting, by first fastening the two back ends first. Then I attached the toddler rails to the bottom of the bed frame and then once they where on I attached the bed frame to the crib with the rails and the brackets for the bed frame pressed together. I hope i explained it so that i makes sense.

I also have this crib. The instructions are on the mattress base. (the wood that holds up the mattress) . If yours is not there, here's a link to an image of it..

http://www.cribs.com/images/pdf/SRK015.pdf

The directions are on the platform that supports the matttress I believe it's number 7 on how to convert to a full size. You have to buy a frame for a full size bed and of course the mattress and box spring. I hope this helps

Put the mattress on the lowest level for a toddler bed.

Hi,

I too, need to convert my crib to the toddler daybed. My daughter climbed out last night! Anyway, I was searching for my instructions and then remembered the instructions are attached to the bottom of the mattress board......hope this helps.

Jessica

I need instructions to transform my mama and papas Aspen Cotbed into a bed! We have lost the instructions! Can u help?