Hi, I have a problem with incoming calls: I can phone but I can't receive calling form others...the phone doesn't ring, while the calling phone is ringing as normal. Resetting the phone can help me? How can I do this? what the reset code is for nokia 6600i slide? Thank you very much.... I'll wait for your answer. Enrico

Check video for 'fax receive set up' in similar model:


Manual receive: In coming call receives like telephone
Fax/tele: Incoming call rings like telephone if its not fax, if incoming is fax it will entered in fax mode automatically
Automatic: Incoming call converts in fax mode after ring count ends( ring to answer option also avail in fax set up mode rage 1-6 rings)
Fax: Incoming calls straight away converts in to fax mode.( this option only for dedicated fax lines)
Set up your best option as per your requirement.

power down, take battery out for a complete 2 minutes. While battery is out hold the power button. this decharges built up static electricty. After 2 minutes reinstall battery and power on phone. If it doesn't work call your provider they will walk you through a series of steps to hardset your phone.

This means that you can hear the ringing of the call but is not able to activate the call, so it means that the green button is not active as the call is taken.
This can happen if there is fault in the pads. You can disconnect the battery and open the phone, remove the pads and look for moisture, dirt or faulty pad contacts- the carbon film failure.
if so you need to get a repair kit to form the tracks . other wise warm the pads and reset.

Extension call forwarding is controlled by a timer, and they put these things in the manual. If your CF after 2 rings is from a call to a specific extension, from that extension, dial *713 and a 2 digit number from 00-99 seconds on the intercom. Start with 18.

If your call forwarding is from intercept, then you have a system programming issue and need to look in the installer's manual or check with your system programmer.

Carl

The answer mode determines whether the HP Fax answers incoming calls or not.

Different answer modes are :

* Fax

The HP Fax will automatically answer all incoming calls using the Rings to Answer setting. This is the default setting.

* FaxTel (unit with handset model only)

The HP Fax automatically answers all incoming calls using the Rings to Answer setting. If the call is a fax call, the HP Fax will receive the fax. If the call is a voice call, the HP Fax will create a special ring to indicate it is a voice call. The incoming voice call will need to be answered using the attached handset.

NOTE: If the HP Fax determines the call is a voice call, only the HP Fax will ring with the special ring tone. The other phones on the same phone line will not ring at all. You will not be able to pick up the voice call using the other phones.

* Tel

The HP Fax will not automatically answer calls. Faxes will need to be received manually.

* AnswerMachine

The HP Fax will monitor the line when an incoming call is answered by a person or by the answering machine. If the HP Fax detects fax tones on the line, it will receive the fax.

I am having a problem in incoming calls, there is red cross(inside red circle) appeared on my main screen of my mobile E52. The incoming calls appeared in received call but i cann't receive my incoming calls. If you have the solution please let me know

wen i receive incoming calls there is no ring or message alert

the internet connection's outgoing is too slow. ALl internet connections have an outgoing and an incoming speed. Make sure you are not uploading anything to the internet or get a faster internet service provider

frist u check your profile setting
secound u change ring
& now check supply of ringer & change ringer Ic

go to phone settings. check the profile and change it accordingly..regs