Tv button on remote does not power on my tv neither does comcast remote

Those have to be programmed for the television. https://customer.xfinity.com/remotes/

try this

press tv button (lights up red)

hold setup button for 10 seconds (tv button blinks twice)

enter code 10030

Press power button on top right. If tv turns off your good

If it doesnt work follow steps above but try these other codes 11348, 11745, 11783

there are a couple of ways to go about it... you can either do a code search with the remote by pressing the tv button then hold down the setup button until the tv button blinks twice. Then press 991 the tv light will blink again then press 1 and then power. then you would press the channel up button until the tv turns off. Then press set up and that will lock in the code. If you pass the code and the tv will not power back on through the remote repeat the same process but press the oppisite channel direction. The other option is search google for your tv code.

10768

1. Turn on your device (i.e. TV).
2. PRESS the button for the device you want to program (TV, VCR, CABLE, AUD, etc.) then RELEASE.
3. PRESS and HOLD the SETUP button until the red LED for the selected device flashes twice, then RELEASE.
4. ENTER the 5 digit code for your brand from the list above.
5. You should receive 2 quick flashes on the LED for the selected device after entering your code.
6. PRESS the POWER button to test the code. (On VCR,LD,and CD players use PLAY)

I plugged this code in and it worked:

10000

Good Luck

comcast sucks and its tech support are a bunch of idiots. the book that comes with the remote is wrong (and for some reason no one in tech support knows this). the remote requires 5 digit codes and all the codes in the book are 4. typing the number 1 in front of any of the codes in the book, for any device and manufacturer, should fix this problem.

10000 saved my relationship!!!!

KZXten,

Don't know if this will help but I have Comcast as my cable TV provider and am using a Motorola DCT-6200 STB and the remote Comcast provides with the STB. To get my Panasonic TV/VCR combo (PVQ-2510A) to work with the Comcast remote I had to do the following:

1) Do the remote code search in AUX mode (or VCR or DVD mode if your remote has that button instead) using the instructions for searching ing remote codes. I had to toggle back and forth between AUX and POWER on the remote until the TV turned off. I saved that code on the remote, but it only controlled the power on the TV, not the volume control.

2) Next I did the remote code search using the TV button on the remote and toggled between the TV button and the volume control until the volume +/- bar appeared on the screen. I saved that code too.

I use the AUX button to turn the TV on and off. Once the TV is on the volume control on the remote operates the TV volume normally. I still need to toggle between CABLE and AUX depending on which device I'm controlling, the cable Set Top Box (STB) or the TV. You may have to experiment some to get it to work correctly.

Here's a link to the remotes Comcast is providing in my area.

http://www.comcast.com/corporate/customers/customer_support/remotes.html

Guys, I checked in my booklet that came with the comcast remote. I could not get any of the codes online to work but the first one in the Comcast booklet did.

The codes listed for the Toshiba LCD TV's are: 10845 and 11656

The first one worked for me...

Remember, on your comcast remote. Press the tv button once, hold setup until the tv button flashes twice then enter the code.

If you enter the code correctly then the TV button will blink twice. If not, repeat the entire process.

If the TV button blinks twice after entering your code the hit the power button. If the tv goes off you know you are good to go!!!

Hope this helps!!!

Most univ. remotes have a search mode if code entry won't work-
Do you have the comcast instructions ? Something like.....
1) Tv power on
2) Push set-up or program on remote
3)Touch tv button on remote
4) Point remote at TV and push power off. Repeat until TV turns off.............then
5)Push enter to save....

Hope I helped you........T.