Can a flat screen tv screen be repaired? I have an AKAI TV and the screen got cracked and part of it is black and I can still see of the blue screen in the back.

You could be right it sound like the power suply, has it got a AC adaptor power suply,bit like a laptop charger? goes from mains to a black box then from box to the TV?
does it stay on at all?

may be there is a problem in setting of ur colours

Are you still having trouble?Please let me know.Thank You very much!
Tyler

first try to reattch all coneection to your televison.
then open the back side cover of your tv then reattch all connectiuon there .
Also clean dust from all circuit.

power pack probably has blown capacitors on it. need replacement of those and the tv should be fine.

you need to inspect the board, most of the time you can trace the problem according to a deformed component.... bulged capacitor, burnt component (black dust on component and board) or if it's an IC crack or chipped ...

These TV's are prone to power supply failure. I can fix the power supply on this TV for approx $100 +s/h.... Contact me and all you have to do is remove the power supply and send it to me and I will repair it with high quality parts. Reinstall and you TV will be good as new...

My 42 inch Akai is about 6 months old,, and is showing green where black should be..
BUt there is help for you all.. Call Verizon, sign up for their "Expert Care" program. it's $10.00 a month, and active after the third month.
with a $75.00 deductable. THey will fix or Replace (give you choice of three alternate models/brands).
Free services under this plan are adjustments, and One FREE remote per year!.
i recomend you sign up for this program, and after 90 days. call for service. They more than likely will replace your TV's.
This is what they did with mine..
ALSO.
it doesn't matter how old your TV is, the plan is applicable to all TV's in your household. So one plan, one monthly payment of $10.00, covers all the TV's you own!!

Air 2 is the source it's looking at for a signal - - where is the signal plugged into? and are you able to change the input or source to look at another?
Bill

It will burn into the screen overtime. The Akai units have a resistor on the address board that feeds the PDP that usually has a crack in the solder on one or both ends of it. There are about 4 address boards that are right below the panel itself and the suspect one is the board right below the line that is appearing. Have someone with solder skills repair it.