Question about Mitsubishi WD52527 52" Projection HDTV
I ran a hdmi/dvi cable from my cable box to my tv and i have video but no sound for it. what do i need to do to get sound?
I know it's been a while since you posted this, but perhaps this can help someone else. Check your cable box. I have Time Warner Cable with an HD-DVR. There is an option in the audio setup menu that will switch the audio from composite/digital to HDMI. I found this as I tested composite cables to fix a video issue with my TV, but lost audio when I switched back. Merely a setting issue. Hope this helps.
Posted on Nov 25, 2008
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Jun 14, 2016 | Hitachi Televison & Video
Jul 15, 2012 | Televison & Video
The HDMI input on your TV receives digital audio
and uncompressed digital video and audio from an
HDMI device or uncompressed digital video from a
This input is designed to accept HDCP program
material in digital form from EIA/CEA-861/861B-
compliant consumer electronic devices (such as a settop
box or DVD player with HDMI or DVI output).
The HDMI input is designed for best performance
with 1080i high-definition video signals, but will also
accept and display 480i, 480p, and 720p signals.
To connect an HDMI device, you will need:
• one HDMI cable (type A connector)
For proper operation, it is recommended that you use
a short HDMI cable. You should not encounter
difficulty if you use an HDMI cable shorter than 16.4
HDMI cable transfers both video and audio.
Separate analog audio cables are not required (see
illustration below). Some CDVs (video CDs) may
not output digital audio signals. In that case, you
may hear sound by connecting analog audio cables.
However, if you connect analog audio cables with
this connection, the HDMI terminal on the TV will
not receive the HDMI digital audio signal and you
will hear analog audio only.
To ensure that the HDMI or DVI device is reset
properly, it is recommended that you follow
• When turning on your electronic components,
turn on the TV first, and then the HDMI or
• When turning off your electronic components,
turn off the HDMI or DVI device first, and
then the TV.
To connect a DVI device, you will need:
• one HDMI-to-DVI adapter cable
(HDMI type A connector)
For proper operation, the length of an HDMI-to-
DVI adapter cable should not exceed 9.8 ft (3m).
The recommended length is 6.6 ft (2m).
• one pair of standard analog audio cables
Dec 16, 2010 | Toshiba 30HF84 30" TV
Sep 28, 2010 | Televison & Video
Jun 23, 2010 | Polaroid FLM-3734B 37 in. LCD HDTV
Jan 21, 2010 | Pioneer VSX-1019AHK A/V receiver
Mar 05, 2009 | JVC LT-42X688 42 in. LCD HDTV
May 23, 2008 | Insignia 37" LCD Flat-Panel HDTV
Jan 10, 2018 | Mitsubishi WD52527 52" Projection HDTV
167 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: