In short, while the printer is On, press the Home button on the printer, use the up-down button to scroll down the menu and locate "Settings", again scroll down and locate "Maintenance", press "Ok" and locate "Auto Head Align" and press "Ok", again press "yes" when you see a confirmation message on the screen. The alignment page will print out. Make sure there's paper in the tray (not in the adf) before performing this.
The long procedure is given below (if in case you need it):
Press and release the On/Off to turn the power on. Open the sheet feed cover on the rear paper tray. Pull out the paper support until it stops at its fully extended position.
Let me know if you need further help.
Good Luck.
Thanks for using FixYa.
Well, just to let you know, it would be better if you could post back with the result or with the problem instead of simply reject my solution. In fact I've provided you the solution for your question. Anyway Good Luck.
Once again Thanks for using FixYa.
×
107 views
Usually answered in minutes!
Multi-colors are being printed - the colors are not being separated. And differnt colors not in the picture are being printed (wider at the top and narrowing to a fine line at the bottom.
×