I need the owners manual mine got lost and we moved For the millennia series high roller power cage model # G 4384 Thanks

no hub safety switch but there is an armature plate inside
the hubs which engages the 4wd
roller cage in the hubs.
Sometimes the plate gets worn
or damaged and loses it's effect
on the roller cages that engage the
hubs for 4wd.
The way it works is like an electromagnet
that attracts the roller cage and puts
a drag on it. The rollers are then
wedged on a ramp or taper that
locks the hub and axle together
so they drive.
If you have power to the hubs that
is good but the armature plates
must also be in good condition
with the proper pole gap so
it has enough magnet power to
put drag on the roller cage in the hub.
Newer models have the similar setup
only it is in the gearcase as one
larger unit rather than the
smaller wheel hub units. https://www.manualslib.com/products/Polaris-Sportsman-335-8688565.html this is the service manual

Hi Linda, The link below is a 14 page user manual for your oven.... CHEERS..
http://www.nuwaveoven.com/resource/pdf/Owner_Manual.PDF

Here is a link to the manual.


http://www.reliablepartsinc.com/danby/Air%20Conditioners/DPAC%27S%20&%20SPAC%27S%20&%20APAC%27S/DPAC%27S/DPAC8099/OWNERS%20MANUAL.pdf

On a website where another guy had this problem, the previous owner told the new owner that he shifted it into 4x4 while in the mud and it is now stuck in AWD. According to Blueline15: "previous owner did a very bad thing. for anyone who doesnt know, remember this example. although you can flip the 4x4 switch while moving, if your back tires are spinning while in 2wd, you can not go into 4x4 or you will cause this problem. just remember this, the flip on the 4x4 the front wheels need to match the rear in wheel speed. so either be moving and not stuck, or come to a complete stop.

what happened is you have rollers in a plastic cage in the front end. when he hit the 4x4 button with the rears spinning, the torque going to the front gearbox while everything was at a stand still that it broke the roller cage.
You're looking at a few hundred dollars at a dealer, depending on how bad."

I hope this helps.

We lost ours in a move too! It plugs in near the bottom/front on the R side of wheel cover. What are the specifications of thr replacement? How many volts output, etc? Thanks

Hello, this is Ava with Think Crucial.

You may find your online instructional manual on how you can access the filter cage of your Honeywell model by clicking the link below.

Honeywell enviracaire 10500 Series Owner Manual Page 7

You can purchase a wide variety of high-quality Honeywell replacement parts for your Honeywell air purifier direct from Think Crucial with free shipping and an exclusive 10% coupon for Fixya.com readers, use code: FIXYA10

https://www.thinkcrucial.com/search?type=product&q=honeywell

I hope this was helpful.

Ava B.
Think Crucial Customer Care
http://www.thinkcrucial.com/

The unit was made by Funai for Emerson. Go to http://www.funai-corp.com/ and click on Support then Owner's Manual. Then search for your model.
http://www.funai-corp.com/6pdf/om/EWD2203.pdf is the direct link but I don't know if the link will work.

I hope this helps.

Cindy Wells

Call Icon Fitness @1-800-999-3756 they be able to locate a manual for good luck!!

Lost manual for power pak and wonder where do I plug in the cord to charge it

There is a manual reset button behind the vent under the touch pad. Turn off the power. Open the door. Remove the vent. Behind the latch is a two wire switch. press the red button on it until it clicks. reassemble and turn on power. It over heated when the power went off by stopping the cooling fan.