Question about Maytag HAV3460AWW Top Load Washer
Unlike Whirlpol and Kenmore washers Maytag Washers drain and spin at the same time.
Posted on Apr 10, 2011
Testimonial: "Thanks, that help alot! It may be the hose is plugged."
Problems with a washing machine not spinning or not draining are often interrelated..
If you are having a problem with your top load washer then check out thistip...
Washing Machine does not Pump or Spin
If you are having problems with your front load washing machine then checkoutthis tip...
Front Load Washing machine not draining and or not spinning
Posted on Apr 10, 2011
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: HAV2360 Maytag does not drain
Hi from retired Englishman in SW France,
I would gently suggest as a first step that you clean the drain motor lint tray/filter. So many 'faults' are caused by blocked filters and many machines will not even go to spin or release the door lock if there is any water still left inside.
Here are my complete guidance notes for checking both the drain motor filter and the drain motor ;-0)
If you are unsure where the filter is, it is often behind the front lower (kick) panel (or in some machines at the rear in an awkward position!) and most are held in by a round cover/knob. Sometimes the filter will not come out with the cover and you will have to persuade it to come out to play!
REMOVE POWER AND ENSURE YOU HAVE A WATER RECEPTACLE/RAGS TO SOAK UP THE WATER WHICH IS BOUND TO POUR OUT!
It's surprising what people have found in theirs! It is always worthwhile checking it on a regular basis.
Now- whilst the filter is removed it is normally possible to see the drain motor and ensure it is not jammed by a foreign object such as a needle or a toothpick. It should be able to be turned by hand/finger- the power IS OFF!
At this point it is also possible to test if the motor works. No clothes or water in the machine, select a spin cycle and put the power back on. You should be able to see the motor turning at some point, possibly straight away. Using something suitable like a glove see if it is easy to briefly slow the motor down. If it is easy then the motor is malfunctioning!
Posted on Apr 11, 2011
Tips for a great answer:
Apr 05, 2018 | Maytag Washing Machines
Dec 02, 2015 | Maytag Washing Machines
Sep 23, 2013 | Maytag Washing Machines
Sep 19, 2017 | Washing Machines
Apr 10, 2011 | Washing Machines
Jan 16, 2011 | Roper RAS8445KQ Top Load Washer
Apr 07, 2017 | Maytag Neptune MAH5500B Front Load Washer
Jan 24, 2009 | Maytag Performa PAV2200
Aug 22, 2008 | Maytag Atlantis MAV6000 Top Load Washer
761 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: