Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Onkyo ht-r500 Hi I have an Onkyo ht-r500 that when I press power it comes on then goes back off after about a second, I have some knowledge of electronics and took the cover off to check for something simple like a blown fuse or broken wire, but didnt find anything, any suggestions? where should I get a schematic, is there anywhere I can get one for free ?? Thank you

Stephen REESE Ferguson Dec 03, 2008

I have the same problem. The system was working fine, I turned the volume up and the system went into standby. I pushed the power button back on and the system came on after a brief second, went right back into standby. I also thought of an inline fuse blown and tried to find one to no avail.... Is there an answer out there yet?

1 Answer

ted dux

Expert 135 Answers
Posted on Oct 02, 2008

ted dux

Expert

Joined: Mar 31, 2007

Answers

135

Questions

Helped

46895

Points

266

I found the manual sometime back...try 3Xdouble-u dot eserviceinfo dot com

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0helpful

1answer

Onkyo HT-R320 Audio Video Receiver. Is there any hard reset feature

Question edited to correct all the typos!

Onkyo support suggested I reset the unit by holding the video 1 button while pressing power to reset to factory default, which according to the Tech will reset the Logic controls of the unit.
Sep 4, 2005

Problem with ONKYO HT-R320 receiver (HT-S570) - AVS Forum

https://www.google.com/search?q=Onkyo+HT-R320+hard+reset

..

Read full answer

Sep 09, 2023 • Onkyo Audio Players & Recorders

0helpful

1answer

How to setup

http://www.manualslib.com/manual/302221/Onkyo-Ht-R500.html

Read full answer

Jan 10, 2015 • Onkyo Ht-r500 5.1 Channels Receiver A/v...

0helpful

1answer

Onkyo AV Receiver HT-R500 No power whatsoever, no illumination of any display options and no activation clicks upon pressing the power button! We inspected the receiver via dust cover removal and found no...

If that is true the power transformer is probably open at the primary, the secondary voltages feed the receiver and power various parts. I suggest getting it checked, my worry is the power transformer may not be available from the parts manufacture.

Read full answer

Mar 28, 2012 • Onkyo Audio Players & Recorders

0helpful

1answer

I have an Onkyo AV Receiver HT-R500 and when I turn it on, it turns on and in less than one second it turns back to standby. What could be wrong?.

Try disconnecting all the speakers and see if it does the same thing. If it doesn't, connect speakers again one at a time to find out which one of them is doing it. Make sure the speakers rating match the output of the amp.

Read full answer

Jun 16, 2011 • Onkyo HTR500 Receiver

0helpful

1answer

Onkyo ht-r500 no speakers attached goes directly into protect mode, standby light blinking..

I have a HT-R520 - First thing stated in the manual is 'Do Not Apply Power to the System Until All the Speakers Are Connected to the Receiver.' This practice avoids any hot connects to the speakers. As with any high-outpiut system connecting spreaker wires to the system while in operation can spike the speakers as well as the amplifier curcuits. Hook up your speakers first and give it a try. Good Luck!

Read full answer

Jul 14, 2009 • Onkyo HTR500 Receiver

0helpful

1answer

Power on but no tuning or sound from other sources

Check for "Tape Monitor On" button. According to Onkyo's web page "Press and hold the tape button for two seconds allows the tape and MD sources to be switched - Also try the speaker A/B switch. - Check back for further assistance - The web page for your operations manual can be found at...
http://www.us.onkyo.com/download/own_manuals.cfm?cat=Receiver
Then select your model.
Hope this helps
Len

Read full answer

Mar 02, 2009 • Onkyo HTR500 Receiver

0helpful

1answer

Connecting Sirus audio to Onkyo HT-R500

Carl- If you are sending a Line Level Audio signal to your ONKYO RECEVER, from your Sirus RCA cable Output, IE, the CD input, the VCR input, the AUX in, ETC. No Need to have the RECEIVER in the FM mode, you are just needing amplificaton of the sound signal or Sirus signal sound.

Read full answer

Feb 28, 2009 • Onkyo HTR500 Receiver

1helpful

1answer

Losing memory settings

On remote control before you shut off yor receiver press "TEST" button to save the memory. It will save every setting. Make sure to do that all the time after you change the setings.

Read full answer

Nov 23, 2008 • Onkyo HTR500 Receiver

0helpful

1answer