It hasn't been used for several years and now when I go to turn it on it isn't working. Roland doesn't seem to be supporting this product anymore. Worth getting it fixed?

Do you mean the Roland E-09 or another Roland product? You need a MIDI to USB In/Out converter. Make sure that the converter is supported by the manufacturer with your OS version. One example is https://www.amazon.com/Converter-LiDiVi-Professional-Keyboard-Adapter/dp/B071KLC884 . This is a USB 2.0 device that works with Windows XP through Windows 10 and Mac OS X. A few others are reviewed here: https://www.musicrepo.com/best-selling-midi-interfaces-the-ultimate-top-10/ . You may need to be connected to the internet and allow your computer to obtain drivers for other devices. Connect the cable appropriately. Turn on the Roland device and make sure that your OS sees the USB device before launching your software. Note: Audacity can only import a MIDI file as a Note Track, https://wiki.audacityteam.org/wiki/Midi . You'll need additional software to capture the MIDI from the device. Some options are listed at the bottom of the Wiki page above. You may need to try several options to find a program that you like.

The Roland E-09 manual is available here: https://www.roland.com/us/support/by_product/e-09/owners_manuals/ . Other Roland support is available here: https://www.roland.com/us/support/ .

I hope this helps. I'm not familiar with FL Studio's menu. I haven't used Audacity's MIDI features. I use the software to digitize audio from Line In and microphone.

Cindy Wells

I have no idea. It is possible to download the user manual but it does not even include the word "fuse" in the entire document. US customer support for operations of these Japanese products is as follows: For operational assistance, you can contact Product Support department at (323) 890-3740. Product Support is open Monday through Friday, 8:30am to 5:00pm Pacific Time. Phone support is provided for select Roland and BOSS products purchased in the U.S. only. But I do note this specifies operational support. The Roland site does offer a user manual but not a service manual.

SPD-SX: Auto Off - Roland - Support - Knowledge Base - Knowledge ...

https://www.roland.com/us/support/knowledge_base/201970679/

Auto Off is a feature that shuts down the SPD-SX automatically when it hasn't been used for 4 hours. This can be helpful if you've mistakenly left the SPD-SX's ... Missing: js8 ‎' ‎Must include: ‎js8

Best to contact Roland directly. Here are the links-
Roland Company Contact Us
Support Roland

Julio, If you already changed power supply and no success, it is probably a bad solder joint on board. I will post a link below that may help or you can try a forum.
http://roland.com/support/article/?q=manuals&p=GT-10

Best bet is to contact Roland support directly. Here's the link-
Roland Company Contact Us

Your best bet would be to contact Roland Customer Service. The link for the USA is-

Support Roland
Roland Support Service Repair Service Center Locator
Roland Company Contact Us

Open up the Roland G-70 and check if all the connectors and flatcables are well seated. Check also if the power supply is working as supposed to.

http://www.rolandus.com/products/productdetails.php?ProductId=655

that driver
http://www.rolandus.com/support/downloads_updates/eula.php?FileName=DPiano_mx7d_v100.zip

They only have it up to 10.7.0 But it should work fine with yours.

Did you clean these contacts with ONLY isoprophyl 99% alcohol and Qtips? If you used another product you may have spoiled the contacts. Also did you clean the circuit board where they contact with the same product?

If you used another cleaner, best to redo your work... quickly... Contact cleaners such as Deoxit and Blue shower destroy this type contact.