Eee code - Fujitsu 36CS Air Conditioner

Need some context. Where do you see "eee"? What program are you running?

Remove the postive battery from the battery touch it to the negtive for 20 secs and reconnect this will reset all computers to factory settings..
Enjoy you tunes!

if you punch in 3 consecutively with a wrong code, the EEE message will be displayed. in order to erase this, you need to place your ignition key at # 1 and switch on the radio and leave it at least between 4 to 6 hours. the code display will come back and re-enter the correct code.

You may be able to solve this problem by dowloading the drivers (from a different machine) and installing.

It is showing EEE because of wrong codes being entered previously,.

To reset it, leave it SWITCHED ON...UNDISTURBED for as long as it takes.

This could be many hours as the waiting time doubles after each wrong code

I am a honeywell dealer and this stat is obsolete and no longer supported. I am not able to pull any info on this. It might be time for a new one.

sounds like the fuel pumpis out on it now

if u have bios code problem u have to reset bios.
penn back side of laptop then put away your cmos cell for 15minutes.
then no need for password.

3 reasons u get an "err" msg are

1. lens aperature not at smallest stop (f22 for example) turn aperture ring to smallest aperture setting or largest number

2. No memory card, or card not formatted or the magnetic latch of the memory card is sensitive try closing it firmly , or try changing memory card may it is damaged by force pullout.

3. weak batteries (4- AA and 2- CR123)try changing them.

4. Try changing or taking out lenses.

i hope something work out for u lemme know