My pictures show an incorrect date on them. How do I set the correct date?

e10 shows that the time and date settings may be incorrect. Make sure the time and date are correct and adjust, if necessary.

Confirm the month, date, year, & time is correct. If it still shows correct, try power cycling your phone and when it comes back online, confirm the error is gone and you still have the correct date & time.

If you need further help, reach me via phone at https://www.6ya.com/expert/brandon_bf4b4a06876c89a0

If you know how much wrong the clock was set, ie.
The clock was 1999-01-01 14:37 but it should have been 2017-05-22 19:00, there are softwares that could correct this error for a directory of files.

just search for exif time offset correct software (exif is the files hidden information about the photo)

open shortcut on pc..it will show correct date, time, etc tho unit does not as it hasn't changed days..on the shortcut, click on Update settings then Send to receiver..then punch in button on back of Station..says "pc search"..transmitter on unit will start steady flashing..unit will go black..gradually everything comes back..don't touch until all back..everything will now match the stuff on the shortcut and the day and date will have changed to the correct one..I do this process every day.

When the Date and Time is set in the BIOS setup or in Windows and when you boot up next time and the date and time are incorrect then the problem is a flat BIOS battery. A flat BIOS battery cannot keep the Data and Time stored in the BIOS. Replace the BIOS battery and set the Date and Time etc and the problem will be fixed.

On digital cameras, the data is stored with the filename. Check the back of your prints to see if the dates were not printed there. Most companies do put at least the date information on the back of the prints as well as any other metadata stored with the file produced by the digital camera. Unlike film cameras, which could only record the date by actually putting it on the picture, digital pictures contain metadata that can include things such as people tags, location tags (geotagging), etc. depending upon the capabilities of your camera. The date and time is always stored along with the filename on all digital cameras. If the company that printed your pictures did not include the date on the back of the picture, ask them if they can do it or find another source to print your pictures that can.

If this did not address your issue, please reply with any amplifying information so that I may more accurately address your issue.

I hope this helped!

See http://www.fixya.com/support/t8513129-clock_our_rd_xv48dt

i've got the same problem. looking arround the internet lots of people had the same thing last year & it corrected itself the next day. (2 march)

fingers crossed

At standby the display will show the date and time. Once the standby display is set, it will automatically be
updated.
General Description
Setting the Date and Time
1 SET MODE (1-8)
2 USER PARAMETERS?
3 DATE & TIME?
4 01-01-2001 15:00
5 Enter the new date and time.
Ex: Date : 10th
December: 12th
Year : 2001
Time : 3:00 PM
If you make a mistake, use or to move the cursor
over the incorrect number, then overwrite it with a correct
one.
10-12-2001 15:00
6
7
1
1 0
1 2
2 0 0 1
1 5 0 0

First you have to go to the set up menu and set the correct time and date, then you can go back to the settings and select OFF for time and date. If you do not set the correct time and date , that default date stays in the picture.