When you installed your printer, you had to install the software on your PC. So go to your PC's start menu, go to Programs, select Lexmark software, select Tools and then select Wifi Configuration Utility. It will open a window which will give you step by step instruction on re-configuring your wifi settings. When you are doing this, make sure your printer is connected to your PC via the USB cable.
When you installed your printer, you had to install the software on your PC. So go to your PC's start menu, go to Programs, select Lexmark software, select Tools and then select Wifi Configuration Utility. It will open a window which will give you step by step instruction on re-configuring your wifi settings. When you are doing this, make sure your printer is connected to your PC via the USB cable.
×
The blinking orange WiFi light indicates that the printer is trying to connect to a network or is not connected at all. Try to print the network settings on the printer. Press Setup -> Network Setup -> Print Setup Page. The printer will then print the network settings. Check if your printer is still connected to your wireless network. If not, you may need to reset the printer's wireless network settings (How to Restore the Network Settings on the X4650 AIO to the Original Factory Defaults) and reconfigure it.
512 views
Usually answered in minutes!
×