I can't connect iomega ego 1tb to my computer

It might be tricky, but you can remove the hdd from its casing, and install into a pc with compatible connections as a slave drive. Make sure to handle the drive carefully, and try to copy any data you want to another drive on the pc, then run chkdsk X: /f /r on the affected drive.
Another possible solution is to rightclick on My Computer, Manage, go to the drive mangement menu, and rightclick on the drive, and import it into your system so that windows can recognize it.

not my expertise I am afraid

Iomega Utility are not Specific to the current device.

My iomega ego external hard disk was working properly but when i connected it today the encryption utility show that-Iomega Utility are not Specific to the current device and no any area shown to type password. My drive contains lots of valuable data. How can I acess into my drive. But the virtual drive is shown.

click start all programs accessories open windows explorer right click on your Iomega then usually you would just right click an array of options will open up select new folder you can name the folder to anything you want as long as its not the same as the ones you already have on your computer
hope this helps

you might have to uninstall the express card restart your computer then reinstall it also make sure its clean and securely seated and there is no dust built up or it might be trouble with your drivers
here is a general look at the drivers and how to update them
if your computer came with a motherboard disc the drivers could be on it
click start control panel administrive tools ,computer management ,device manager look through all of your devices if you see a yellow question mark?or exclamation mark ! or red x
right click to reinstall drivers or
if you can see your usb but its not working
ports(com&lpt)right click update driver hope this helps

You can't view them on it, it's just for storing the files. To store them you download the file to your pc, connect the drive to the pc and copy them to it in Computer.

Well this method will destroy everything on it so make sure there's nothing on it. Go into computer, right click on your drive, click format, the options should be default unless you know what you're doing, this should restore all the space to usable space. If this doesn't work go to properties then tools and disc error checking, there might be a bad sector.
Nik

Yes, because it is a Plug-and-Play device, and because Windows supports Plug-and-Play.

Few different things are possibilities.
1. Are you connecting the device via USB 3.0 to the USB 3.0 adapter on the computer? 2. Try switching out your USB 3.0 cable for a different one. 3. If you are using the USB 2.0 instead. Make sure you are using the USB Y cable for the device and not just a standard USB 2.0 straight cable. Using the USB Y cable. Plug the cable into the device first, then make sure to plug both USB's into the computer starting with the short side USB then the longer side USB second. Also try using the USB's on the back side of the computer as they will supply more power than the USB's on the front of the computer.

do you mean on the external drive or your computer as there is a difference ?