Question about Panasonic KX-TGA560M 5.8 GHz Cordless Expansion Handset
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
For the KX-TGA181AL
The "small inverted triangle" flashing in the bottom left hand corner of the screen indicates that -
the handset is too far from the base.
The AC adaptor is not connected
High electrical inteference
The handset registration is canceled
I presume that all is well with the base which leaves the handset registration. to reregister.
Press the OK button.
Press the down button (Setting HS should now be displayed)
Press the down button untill REGISTRATION is displayed
on the base unit press and hold the ittle button on the left side of the base unit for about 5 sec.
On the handset press up or down to select a base unit number.
Wait untill BS PIN is displayed
Enter the Base unit Pin no. defalut is 0000
A confirmation tone will sound and the triangle should have stopped flashing.
that should sort it out,
BTW to lock and unlock the handset press and hold the OK button for 2 secs
Posted on Jul 06, 2008
I solved my problem by trial and error!
Steps to program speed dial on the Walker/Clarity Model W-1000 Touch Tone Sound Amplifier desk set phone w/large number pad.
1. Choose phone number to program including the (#1) digit for a long distance direct dial if
Write chosen number(s) on a scratch pad as a guide for numbers. Identify numbers with the
names or contact description (ie."Mom's Cell Phone.")
2. Remove hand set receiver from phone.
3. Press "memory set" button ONCE on the phone located uder the receiver on the desk set.
4. Enter phone number chosen,including area codes and long distance prefixes if needed!
5. Locate the speed dial position button you want for that number...(located adjacent to
tag/pad slot for name and/or phone number to be written after entering.
6. Press the speed dial position button (ONCE). Then replace receiver back in craddle.
7. Try out speed/dial program. Pick up receiver, push speed dial button(position) listen to see if
correct phone number is contacted. Once established as correct; program additional speed dial
numbers: ie family, business, as needed.
8. DO NOT TRY TO PROGRAM THE NATIONAL EMERGENCY 911 NUMBER! Keep this in your
9. If you make a mistake while entering a phone number: Stop, Hang up phone and start all over
again in the procedure sequence.
10. Remove white "description pad with slots for names or numbers) from underneath clear
plastic cover.(use a paper clip end to lift up plastic cover). Write name/description for that number
on white pad(ie. "Mom's Cell") Use a PENCIL FOR DESCRIPTIONS!!
11. TO SAVE TIME AND INCONVENIENCE TO PERSONS/BUSINESSES OF HAVING TO
ANSWER YOUR CALLS; CHOOSE A AUTOMATED ANSWERING NUMBER (USUALLY A
BUSINESS ANSWERING AUTOMATED SERVICE (IE. LARGE INSTITUTIONAL PHONE
NUMBER THAT HAS A MENU PROMPT usually a AT&T 800 # will have a prompt menu
USE this procedure to see if you program correctly then once you know how; go back and re-
enter all the numbers that you actually want on your speed dial settings.
Posted on Nov 29, 2008
I just worked it out.
followed by your passcode (usually 1234)
Then press next till you find Mark
Press Shift then the button under Clr
Then enter the name so for Claire start with 2 and swing the jog button round till you get a C, then press 5 and swing the jog button round till you get an l etc..
If you make a mistake press Transfer
Then when you've got your name correct press Auto Dial.
Posted on Mar 24, 2009
SOURCE: New Voice Mail message
You received a message on the voicemail system provided by your telephone company. To hear the message, dial the voicemail number provided by your service provider (in many cases, this will be your own phone number), and follow the voice instructions for listening to your messages. You need to store the voicemail access # by pressing [MENU], [#] ,, on the handset. To access the voicemail, press [TALK], then softkey [VM]. Depending on your service provider, you may need to clear your voice mailbox to remove the notification.
Posted on Jul 15, 2010
Tips for a great answer:
Dec 14, 2016 | Panasonic Lands Phones
Nov 26, 2015 | Panasonic Lands Phones
Aug 18, 2014 | Lands Phones
Jul 04, 2011 | Uniden Cordless Phone
Nov 20, 2010 | Panasonic Cell Phones
Sep 25, 2008 | Uniden 2.4 GHz Cordless Phone System
58 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: