I need a solution for talkswitch pbx 480 working with tg-1061 cordless panasonic to access the call waiting and program the hold music .when there is a call wait button on panasonic or flash , I can use it to hold the caller and transfer him to another ext but I cannot pick up a call waiting from outside caller and I need to know how to do that ,by programming or hitting any button.thanks .

SOURCE: caller id not working

US phones use Bellcore FSK caller id. India uses DTMF caller id. Buy a DTMF- FSK converter at a telecom shop.

SOURCE: TalkSwitch 48 disconnects call after transfer

You are using the wrong option for transfer -- the one you are using is a conference which requires the person transferring the call to stay on the line. You need the option which permits a blind transfer or announced transfer. This issue is specifically discussed in the manual.

SOURCE: KX-TG 1100SP CALLER INFORMATIONNOT DISPALYED

Can you send me an English manual for a Panasonic...KX TG 1100SP at our email id [email protected]

SOURCE: talkswitch 480 VS no longer shows caller ID Simply "out of area".Can this be repaired?

Call Talkswitch, they will offer a swap for another system and bill you $500 to do so. This happened to me twice. First swap was $250. A year later it is now $500. I was told this increase was due the end of the system life and a shortage on parts. My system is just about 4 years old. My next system will have telephone line surge supperssors inline with the telephone lines.

SOURCE: Talkswitch caller ID from outside calls not working

Log into your TalkSwitch Management Software.
Go to Telephone Lines.
Under each incoming line make sure that Caller ID is checked.
Click File> Save
Hopefully this will fix it for you.