Update hd repair Only say "Please Wait",

My HP notebook died like this because the HD was worn out, because of the constant updating. remove Windoze 10 and/or replace the HD, i threw mine away....i recovered the HD on another pg using a HD-usb adaptor they cost 10 bucks on ebay ;)

TURN signal troubleshooting...diego 8 months agoIf you can not turn on your camera LCD HD BacPac HERO2 and the battery is fully charged, then unfortunately there may be a communication failure between the camera and BacPac. We recently discovered a bug in the firmware that can cause this problem and have released a firmware update to allow the camera to repair the LCD.

This latest firmware update will also activate the 3D functionality with 2 HD cameras and our system HERO2 3D.Recuerda save your pictures and videos before the update.

To continue with the repair of LCD BacPac, please follow these steps:

1). Upgrade your camera with the latest firmware, v.70 connecting the camera to the computer with the GoPro Cineform Studio software running. If you have not previously completed the firmware update, follow this link:
http://gopro.com/support/hd-hero2-fir...

2 way's one way is to turn off computer all together then hook up hd and reboot drivers will be found either in system or in window's updates second method is to go to the manufacturers web site that made your hd and go to the support page there you can download driver software which you can install into your computer then it will be recognized and after that if there were any updates from that point on windows update will update it .

Put the HD in an other computer , start the instal process and let the installation program copy all files to HD. Just when computer is to restart you turn off the computer and put the HD in the C400 and continue the installation from there . When you got one computer going , clone the HD.
Try also to repartion and reformat (hard) the HD.

Sounds like your trying to download the wrong driver for your operating system. Double check that you're selecting the correct drivers for your operating system.

When I tried to update the Realtek HD Audio drivers for my ASUS F5GL Notebook I got a message coming up saying "Install Realtek HD Audio driver failure !!" with the error code 0x00000103.

Hi if your player is getting stuck on the 3 p lease wait screen you have a HD or HD ribbon issue. The HD ribbon can be replaced sometimes to fix the issue and other times the HD is going bad or has a bad sector in it.


If you need any more help, parts or your player repaired you can contact me threw my repair service web page at firehouse7777.weebly.com thanks

cannot see maxtor onetouch III USB on computer

Here is what you should do, go to a computer store and buy a 40G HD. Try installing on that. It could be the size, but most likly not. Im going to guess and say take a look at the bottom of your reinstall disk. If it has any scratches, there is your problem. NTLDR is your boot sector on you HD.

you have to get internet back. And let it finish updating. No way to reverse it.