I have sharp AR-5316 copier.. My print out is dirty. I had replace already the toner cartridge, developer, cleaning blade with new one. But still the printing is dirty..Any one can help me about this problem. What are the other concerns of dirty printings? Hope anyone can help me about this problem.

SOURCE: AR-M455 Printing Blank Pages

hi im jules_09.try checking the transfer roller or the drum charge roller or charge wire both of this unit are responsible for blank copy.either there id a current leak on those parts or your drum and transfer power pack is deffective.is the opc drum not expose to light morethan 8minutes?just check the transfer unit then the drum charge wire or roller

SOURCE: Sharp AR 5316

It worked thanks alot.
All I did was to press the #,interrupt,c,interrupt in sequence. The display then went off.
I then press the numeric keypad 1,4 and start botton in sequence.

It's fine now.
A big thanks
Ometan Goodluck
Nigeria

SOURCE: add developer in sharp AR-5316

That model uses a TD cartridge so when you replace the toner the developer is included. The crum chip on the TD cartridge will reset the counters and sets the developer.

SOURCE: sharp copier ar-5316

sharp fo-2600 fax ld error

SOURCE: Sharp AR-5316 will not print

The toner cartridge comes in a box and fits into the developer unit. The developer unit is held in the machine by one 'phillips head' screw (usually blue in colour). The silver bag that came with the machine is not toner but actually called a carrier. The developer unit needs to be removed from the machine and the carrier poured into it. Thereafter you replace it in the machine, secure the screw and re-insert the toner cartridge.
However certain settings have to be made on the machine to set the basic parameters for the optimal useage of the machine and this is only done by authorised trained personnel.
I suggest you contact your closest Sharp dealer and ask them to do the necessary.
Regards
Gavin.