I have an RCA TV and i can not get the remote to work it will not turn the tv on or off

The 4-digit code to program a universal remote to work with a RCA LED32B30RQ TV model is likely to be one of the following:
11447 11758 11442
To program the universal remote to work with the RCA LED32B30RQ TV:

1. Turn on the TV
2. Press and hold the "Setup" button on the universal remote until the "TV" button blinks twice.
3. Press the "TV" button on the remote.
4. Enter the 4-digit code for your TV using the number buttons on the remote.
5. Press the "Power" button on the remote. The TV should turn off.
6. Press the "Setup" button again to lock in the code.

If the TV does not turn off after entering the code, please try the other codes listed above. If none of the codes work, you may need to refer to the universal remote manual or contact the manufacturer for further assistance.
Note: The method to program the universal remote may vary depending on the remote brand and model

Programming an RCA Universal Remote - YouTube

? 2:46
https://www.youtube.com/watch?v=MZd4yBivcZ4
Nov 10, 2008 - Uploaded by alpharedecho
... how to program an RCA Universal remote for operation with your TV. ... Still in able to work or my rca flat screen and my zenith. .. ive .... I'd do it over and over and the power button on the remote just turns off in the end?.

Magnavox TV codes - Magnavox TV set. Buy, reviews ...

magnavoxtv.org/magnavox-tv-manual/magnavox-tv-codes/

Helpful Resources for Magnavox TV codes. Press and hold ... Note: If some buttonsdo not operate your equipment, try one of the other codes for your brand. TV.

RCA Universal Remote Control- Target Programming ...

could be condenser inside the tv have it check by a pro

RCA tv codes from the original RCA 3-in-1 universal remote.000,181,100,233,203,212,098,005,003 004,006.One of these codes program for the RCA universal remote will work.Sorry but to find the tv wright codes for the tv to work.The tv must be power on and working to find the tv wright codes to program in to turn the tv off to get the tv wright codes.Try website like Rmotes.com to buy the tv original remote,will not require tv on to used the tv original remote.

Newer brands of tvs are using new codes that old remotes don't have. Only older learing remotes from original remotes or USB upgradable or newer one that were made after the tv was made will work.

These are generic RCA Universal Remote codes to control an Electrohome TV: 006, 011, 014, 027, 038, 061, 068.

Your specific model will have other additional codes. If these codes don't work, you could try re-posting with more information.

Many RCA universal remotes have a CODE SEARCH button. If yours does, here are the steps to search for the proper Electrohome TV control codes:

1. Manually turn ON your TV.
2. Press and hold CODE SEARCH.
3. Press and release the TV button.
   
4. Release CODE SEARCH.
5. Press OFF/ON repeatedly until the TV turns off (you may have to press up to 100 times at a rate of once per second).
6. Once the TV turns off, press and release ENTER.

Hope that helps.

Hi

Ideally I need you to clarify a few details on your exact RCA remote model and number and also whether this is a Samsung TV or other unit like a DVD etc.... that you wish to program

However assuming it is a Samsung TV here is a list of the common RCA codes for this TV. You will need to go through each one individually until you find one that works.

Code 1004 for Samsung TV Code 1005 for Samsung TV Code 1006 for Samsung TV Code 1012 for Samsung TV Code 1013 for Samsung TV Code 1015 for Samsung TV Code 1017 for Samsung TV Code 1019 for Samsung TV Code 1082 for Samsung TV Code 1104 for Samsung TV Code 1105 for Samsung TV Code 1106 for Samsung TV Code 1171 for Samsung TV Code 1172 for Samsung TV

Hope this helps. If so please do rate my answer.

Otherwise please post up additional details as outlined and I will see what I can find.

Many Thanks.

I programmed an rca universal remote by:
TURN ONTHE TV
HOLDING DOWN THE TV ANDTHEON/OFF BUTTON ATTHE SAME TIME.UNTILTHEON/OFF BUTTON STAYED ILLUMINATED.
PRESS THE PLAYBUTTON IT WILL BLINK,IF TV DOES NOT GO OFF PRESS PLAY EVERY 5 SECONDS UNTIL TV GOES OFF.
ONCE TV TURNS OFF HIT THE REVERSE BUTTON THE TV WILL COME BACK ON.
HIT THE STOP BUTTON TO SAVE THE CODE.
REPEAT THIS BUT HOLD THE OTHER DESIRED DEVICE INSTEAD OF THE TV.

HOPE IT WORKS

Igotthisinfo from google....then typed in rca universal remote...there was a sight for programming remote.

turning off mute with no remote on a rca reciever

If the front panel lock is on, you will need a working original remote (or a universal remote properly programmed for RCA) to turn the set on. The IR receiver is next to the buttons on the fromt but the RCA IR receivers are very reliable, and I have yet to see a bad one in a modern RCA TV. Once you turn the set on by remote, you can enter the menu and turn the FPA off.