Hi, my name is shourav. I'm from Bangladesh & My time zone is (GMT +6). But in my nokia E5 my time zone showing GMT +7. I reset and hard reset my phone but nothing changed. Please help me.

You can't bypass it, there is no magic code. All you can do it hard reset it. It is IMPOSSIBLE to forget a code you are using 20 times a day! Stolen!

https://www.google.com/search?q=nokia+e5+hard+reset

..

NETGEAR FVS338 Comand Line Interface (CLI)

FVS338: />
bin/ config/ stats/

FVS338: /bin>
ls - lists available commands
cd - changes current working directory
help - Used to list directory or help for a specific command
version - Get the Product/ModSets Version history of the image. Usage : version -all
logout - Closes the Current Session
shell - Run a unix shell
linux-version - Prints the Linux-Mod-Set Version
ping - ping <ipaddress/host> [-c count] [-f] [-s packetsize]
ICMP ECHO REQUEST Check statistics

FVS338: /config>
sys/ sntpc/ ip/ ether/ polgrp/
userdb/ ldsv/ snet/ ad/ iapd/
firewall/ relay/ upn/ algs/ tcpreasm/
diag/ trace/ ike/ spd/ sad/
ipsec/ dnsrd/ ddns/ dhcpc/ ipreasm/
dhcpd/ dhcpr/ rtrid/ macdatabase/ cmgr/
scep/ ldap/ syslog/ mesgthrt/
ocsp/ domain/ wan/ snmp/
lxos/ interfaces/ webproxy/ http/

FVS338: /config/sys>
setzone - sets system time zone. Usage: setzone +/-hh:mm abbrivation <-dst [set/reset]>
settime - sets system time. Usage: settime mm-dd-yyyy hh:mm:ss
time - displays system time. Usage: time
reboot - Reboots the system. Usage: reboot
facdefault - Sets factory defaults. Needs reboot
boxtype - Displays the box configuration type(SOHO(SME)/MTU). Syntax: boxtype
syslist - Displays all the system variables USAGE: SysList
syscontact - sets the system contact person info :USAGE SysContact <CONTACT ADDRESS>
sysname - sets the name of this node :USAGE SysName <name string>
syslocation - sets the physical Location of this node :USAGE SysLocation <name string>
domainname - sets the domain name:USAGE domainname <domain name string>
startcap - Starts packet capture :USAGE startcap <IfaceName> [-c NoOfPackets] :Ex startcap ixp0 -c 20
stopcap - Stops the packet capture :USAGE stopcap

FVS338: /config/sntpc>
sntpenable - USAGE: sntpenable [-i <timezone Index>]
1 - UK,GreenWich,Casablanca,Monrovia (GMT).
2 - Eniwetok,Kwajalein (GMT-12:00).
3 - Midway I., Samoa (GMT-11:00).
4 - Hawaii (GMT-10:00).
5 - Marqesas Is. (GMT-9:30).
6 - Alaska (GMT-9:00).
7 - Pitciarn Is. (GMT-8:30).
8 - Pacific Time ..US and Canada (GMT-8:00).
9 - Arizona (GMT-07:00).
10 - MountainTime(USA)(GMT-7:00).
11 - CentralTime(USA),Mexico City,Tequciqalpa (GMT-6:00).
12 - Indiana East (GMT-05:00).
13 - EasternTime(USA),Bogota,Lima,Quito (GMT-5:00).
14 - AtlanticTime,Caracas,La Paz (GMT-4:00).
15 - Newfoundland (GMT-03:30).
16 - Brasilia,Beunos Aires,Georgetown (GMT-3:00).
17 - Mid-Atlantic (GMT-2:00).
18 - Azores,Cape Verde Is. (GMT-1:00).
19 - Europe (GMT+1:00).
20 - Egypt,Finland,Romania,Turkey,Greece,Jordan(GMT+2:0 0).
21 - Israel(GMT+02:00).
22 - Mascow,St.Petersburg,Iraq,Syria(GMT+03:00).
23 - Iran (GMT+3:30).
24 - Armenia, Azerbaijan (GMT+4:00).
25 - Afghanistan (GMT+4:30).
26 - Pakistan,Russia (GMT+5:00).
27 - India (GMT+5:30).
28 - Bangladesh,Russia (GMT+6:00).
29 - Burma (GMT+6:30).
30 - Thailand, Combodia, Laos (GMT+07:00).
31 - China,kuala Lumpur,Singapore,Philippines,Perth(GMT+08:00).
32 - Japan,Korea,Russia (GMT+09:00).
33 - Adelaide (GMT+9:30).
34 - Brisbane,Gaum,Papua New Guinea,Tasmania (GMT+10:00).
35 - Sydney,Melbourne,canberra (GMT+10:00).
36 - Lord Howe I. (GMT+10:30)
37 - Solomon Is., Magadan,Russia (GMT+11:00).
38 - Norfolk I. (GMT+11:30)
39 - New Zealand,Fiji,Kamchatka,Marshall Is.(GMT+12:00).
40 - Tonga (GMT+13:00).
41 - Kiribati,Western Samoa (GMT+14:00).
addservers - USAGE: addservers <Primary Server Domain Name/IP Address> [-pp <Primary Server Port>]
[[-s <Secondary Server Domain Name/IP Address>] [-sp <Secondary Server Port>]]
Public SNTP Servers list:
louie.udel.edu ntp-0.cso.uiuc.edu ntp.ourconcord.net
ntp-1.mcs.anl.gov ntp-2.mcs.anl.gov time-a.nist.gov
time-b.nist.gov time-a.timefreq.bldrdoc.gov utcnist.colorado.edu
time.nist.gov time-nw.nist.gov nist1.datum.com
nist1.aol-ca.truetime.com
listservers - list servers ....
Syntax:listservers
sntpdisable - Disables the sntp client....
Syntax:sntpdisable
show - Displays the Sntp Client Parameters...
Syntax:show
delservers - Delete servers...
Usage : delservers <prim/sec/all> (primary server/secondary servers /both )

FVS338: /config/ip>
route/ rip/
address - address <ifname> <static/dynamic>[if static only:-><-ip <ipaddr>/<mask'bits>>]
[-rip <enable/disable>] [if dynamic only:-><-dfrt enable/disable>,
we need to tell whether DHCP client should add default route corresponding to
the gateway it got from DHCP server]
alias - alias <interface> <ipaddress> [-m mask] [-b broadcast]
up - USAGE : Up <interface>
down - down <interface>
list - list [-i interface] lists all the statistics
stats - USAGE : stats

FVS338: /config/ip/route>
add - add <ipaddr'default> <gw> <mask> <iface> <metric>
Ex: add 172.16.5.0 172.16.1.5 255.255.255.0 eth0 15
del - del <ipaddr'default> <gw> <mask> <iface> <metric>
list - lists all the routing table entries

FVS338: /config/ip/rip>
showrec - To show records: showrec [-name <record name>]
delrec - To delete a rip record: delrec <rip record name>
addrec - To add a rip record: addrec <record name>
<version: 1[for RIPv1] or 2[for RIPv2] or
3[for RIPv2(RIPv1 compatible)]>
<direction control: Tx or Rx or TxRx>
[-auth <authtype: 0(AUTHNONE), 2(SIMPLE) or 3(MD5)>]
[-id1 <authid1>] [-key1 <authkey1>]
[-starttime1 <starttime1>] [-stoptime1 <stoptime1>]
[-id2 <authid2>] [-key2 <authkey2>]
[-starttime2 <starttime2>] [-stoptime2 <stoptime2>]

Note: For Simple authentication use opt parameter [-key1 <authkey1>]
to enter Password
For starttimes and stoptimes:: Time format: <mm/dd/yyyy'hr:min:sec>
Example: -starttime1 6/6/2001'5:30:00
modrec - To modify a rip record: modrec <record name>
<version: 1[for RIPv1] or 2[for RIPv2] or
3[for RIPv2(RIPv1 compatible)]>
<direction control: Tx or Rx or TxRx>
[-auth <authtype: 0(AUTHNONE), 2(SIMPLE) or 3(MD5)>]
[-id1 <authid1>] [-key1 <authkey1>]
[-starttime1 <starttime1>] [-stoptime1 <stoptime1>]
[-id2 <authid2>] [-key2 <authkey2>]
[-starttime2 <starttime2>] [-stoptime2 <stoptime2>]

Note: For Simple authentication use opt parameter [-key1 <authkey1>]
to enter Password

For starttimes and stoptimes:: Time format: <mm/dd/yyyy'hr:min:sec>
Example: -starttime1 6/6/2001'5:30:00
list - List RIP list : list [-name <ifname>]
merge - Set Merge on or off : merge on'off
senddefault - Set SendDefault on or off : senddefault on'off
subnets - Enable/Disable subnets : subnets on'of

HelloOpen menu >> Setting>> Date and Time Setting>>> and select the correct Time Zone (GMT +,_ select according to your country).That's all you need to do.Good luck

go to phone's date and time settings open it and go to time zone ....put this same as ur country time like gmt for london gmt+1 for some other country etc do it it will show correctly.

Hi

Please download the manual for Nokia C5 and check Time management. Click here to manual

hi
pls check your phone time and adjust it.
mohan

Hi,
When you place a new or a existing SIM card from another phone provider into a different cell phone and it asks for a Security Code
You can unlock your phone through online
(unlocking service is not free)

please follow this steps
1)goto http://www.unlock-zone.com
2)register a account(it is simple only your name,email id and password)
3)select your phones manufacture(blackberry,nokia,samsung,lg.................)
4)select your phones model
5)select your country
6)select your service provider
7)enter your phone IMEI(press *#06# to get imei)
8)complete transaction
9)your unlock code get within few hours

Good Luck. Thanks for using FixYa.

go to setting and date & time setting and change time zone setting (ex. GMT+5.30 is indian time zone setting)
if you want to know your local time zone just type your country name and GMT (Ex. Indian GMT) and check it ..

Sync the phone to itunes and do a factory reset backup your data first

I think you just need to reset your phone... Menu>Setting>Phone>General>Reset Default Setting.

And after that your phone will restart . and beware ( put time zone according to your country.. ( Like for Australai Sydney is +10 GMT and for INDIA +5:30 GMT