How do I turn on my speakerphone for my Uniden EXP4540?

If you want to make a call using the landline, first make sure that the phone is in standby and not ringing with an incoming call. Press Speaker or Home/Flash on the handset. (Both are on the left side of the handset; the speaker key is closer to the LCD screen.) Alternatively, press Home/Speakerphone on the base. Then dial the number, including the area code as needed. When you use the Speaker key, the entire call will be on the speakerphone. When done with the call press End/Clear (on the right side of the arrow keys, opposite the Home/Flash key).

This is described in the manual as the features of the keys on the base and the handset are described. The manual is available on the product page: https://www.uniden.com.au/product/xdect-8355-2/ . The current link to the manual is https://www.uniden.com.au/wp-content/uploads/OM_XDECT_8355.pdf .

I hope this helps.

Cindy Wells
(If you have paired the Uniden XDECT 8355 to a cell phone and want to use that line. Press the Mobile button then dial. (On the base, it's Mobile/Speakerphone. If you have paired the phone to two cell phones, you will be prompted to indicate which mobile device you want to use for the out-going call.)

Note* in some rare cases, the phone itself can become defective or damaged to a point to where the volume reflects loud ringing but doesn't make any sound. In that case customer service should be available by calling uniden directly.
menu , vol up down
advanced , press enter
silenmode, volume up till display" off"

The EXP4540 isn't an answering machine. Please refer to the documentation for whatever answering machine you have.

If you require further assistance, please add a comment to this question and specify the make and model of your answering machine.

Press the speakerphone button on the right side of the handset. It's the button numbered 23 on the illustration on page 4 of the manual.

check headphone socket, clean & some heating. or" find switch connection & that have short pin & open it.

The 2060-2 does have speakerphone ability. Simply press the speaker button during the call to switch between speakperphone and "normal" modes. The speaker button is at the lower-right-hand corner of the keyboard, marked with a speaker icon, located below the # key.

You can download the manual from the manufacturer's web site at
http://www.uniden.com/content/ebiz/uniden/resources/ownersmanuals/DECT2060-2om.pdf

how do you speakerphone on binatone

Thats weird. Hmm, what does the company say? i assume its past the warranty?

Follow the instructions on page 7 of this manual.

Since you declined to specify the model of your Uniden system, I can only direct you to the list beginning at
http://www.uniden.com/scat/cordlessphones_mnl
to download a copy of the manual.