How can I download the data from de Symbol PDT 3100 to a PC?

Does anyone know if the Symbol pdt 3100
Has gone flat if the data can be recovered ?

hi does your PDT 3100 have the Oneil's RSwin software if it does i can trade your PDT's for new ones. is the one that says Login Electronic Picklist record center Ops etc. etc. [email protected]

mine was stuck at the command prompt (DOS) and i did the following to get the system to reboot.

Power off the reader. Press folowing key and maintain them pressed: "Func" "Space" "M" "Power", release "Power" and release other keys. Now the system is reset.

Power off the reader. Press folowing key and maintain them pressed: "Func" "Space" "M" "Power", release "Power" and release other keys. Now the system is reset.

Yves

You have to unistall the program that is inside unit you purchased and load one you are using. I can help you during this configuration. You can always contact me by phone or email 630-622-2024 [email protected] Please visit our website www.legacyglobal.com

You need a cradle, a null modem cable, a pc running dos and the command rcvhex.exe which you can download from the net.

If you can get all this together, get back to me and I will give you full instructions on the process.

Try this website: (The url is a long one but...)


http://support.symbol.com/support/browse.do?WidgetName=BROWSE_PRODUCT&TaxoName=SG_SupportGoals&BROWSE_PRODUCT.isProductTaxonomy=true&BROWSE_PRODUCT.NodeId=SG_PDT3100_1_2&BROWSE_PRODUCT.thisPageUrl=%2Fproduct%2Fproducts.do&id=m4&BROWSE_PRODUCT.TaxoName=SG_SupportGoals&NodeType=leaf&NodeName=PDT3100&document=DT_SOFTWARE_1_1&BROWSE_PRODUCT.NodeType=leaf&NodeId=SG_PDT3100_1_2&AppContext=AC_ProductPage&param_document=sp

If memory serves me correctly it means you've run out of space on the Edrive (the part for data storage).

Try downloading a smaller file ...perhaps an old one you've backed up. it is possible memory is still available for them ..

Let me know what happens when you try the smaller file ... I'll look up the error if that doesn't solve the problem. I would look it up now ...but I'm at home.

I would like to suggest since you are approaching to GUI enviroment you need to develop system build by visual basic using MSCOMM control by sending and receiving data between PDT3100 and PC.

Please try to visit www.planetsourcecode.com for best VB tutorials about how to use MSCOM1 or hire/chat me if you need my further assistance.

Good luck,

Philip