Hi, do you know where I can get an instruction manual for a Hoover HNL6166 Washing machine?

If you have replaced the pump with a new one and still no pump, check the hose from the washbowl to the pump. Usually a convoluted hose . It possibly has a blockage. Take the end of this hose off of the pump and check up it ....you might be surprised

Hi dear.Please follow the link below to download the user manual.I hope that helps.Thanks.
http://safemanuals.com/314159.php?k=a7b53ba999744023ef3ebdf1d0ef51df&ID=2168979&q=HOOVER NEXTRA6

can I have the instruction how to use for HOOVER vision HD 1400 AA+A. I lost the manual

http://service.hoover.co.uk/manuals/Manuals.aspx?Section=11
Just make sure you don't put a space between HNL and 6166. ie; HNL6166. The owners manual is there. Hope this helps.

http://service.hoover.co.uk/manuals/pdfs/AB100.pdf

Hi.
In you browser box type in Hoover user manual.
Then scroll down to Hoover after sales service instruction manuals.. Click on this, and then on Laundry.then on Waher -dryers, follow instructions
You will find your model listed there,.
Please leave good feedback.
Thanks

Hi.

I can point you in the right direction

Go to Hoover in your browser, and go to after sales, download user instructions.

You should find what you want.

Good luck

I have a Second Hoover HTC243 , I don't have the user manual . I don't know how to use it , can u tell me how to use it

I am not an expert on hoover - mainly hotpoint...but..

To empty your machine of water reset the programmer to Final spin. the machine should empty normally.

On hotpoint if you have a fast flashing light its most likely to be 1 of 2 things.

1. The belt from the motor has broken. (price for belt is less than 20 pounds.)

2. The brushes in the motor have worn down too much to make the drum turn. Look underneath the washing machine to see if black power (Carbon) is deposited under the motor.
(Price for set of brushes is less than 20 pounds)

Labour should be no more than half an hour by anyone decent.

Regards

You have to open up the top to check the one pipe going into the softener compartment. You can even peep when the machine is running the soft run to see if water flows into the compart. If this does not work dismantle the compartment totally to check. Maybe the screens at water entry has clogged over time.......