My wife's sunbeam microglide iron does not get hot. What could it be the problem?. Mauricio. Thanks.

Question 1

0helpful

2answers

Sunbeam iron model gcsbcs-212 troubleshooting unit keep turning off while ironing

Sunbeam Model: gcsbcs-212
The outlet cord was bad (pinched from falling off the ironing board) inside where the cord goes into the iron.
1. Remove Bottom Sticker
2.Remove 2 Screws
3. Pry off Sunbeam Back Cover
4. Remove 2 screws
5. Pry off Cover
6. Remove Cord Clip (2 Scews)
7. Cut Cord and Strip off ends ( do I cable at a time) Red Circle
8. Crimp back and Test.

Mar 23, 2017 • Sunbeam Irons

tip

I just took apart a Sunbeam iron. This is how it disassembles: first remove the...

I recently had a problem with the steam button. It somehow during normal use came off its track in the handle and was stuck down in the "slot". After several searches online and this site i tried a knife along all the edges trying to figure out how to disassemble the iron. Well one quick flick with my knife to the side of the steam button and it came out. Well the surprise was the screw under these buttons. Hopefully this can help someone looking to disassemble the iron when they have problems.

on Jun 11, 2011 • Sunbeam 4214 Iron

1helpful

1answer

Sunbeam iron 5900 2400 watt not become hot. Now what can I do?

opps sr 5900 2400 watt have mixed consumer confidence
http://www.productreview.com.au/p/sunbeam-ultura-sr5900.html

if the dial or iron wont heat up at all

most sunbeam irons have 12 month warranty
if less than 12 months old and you have the reciept
take it back for refund or exchange

if out of warranty toss in the bin...... buy a new iron

Sep 20, 2016 • Sunbeam Irons

0helpful

1answer

Sunbeam steam iron model #GCSBRS-1 does not give steam. 11/2yr old

I have had the same issue with both of these irons. I bought them both thinking they would be a "better" iron with more steam and have not been happy within the first year of owning them. Thanks for the tips.

Mar 22, 2012 • Sunbeam Irons

0helpful

1answer

My wife has a Sunbeam iron handed down from her Grandmother so it is possibly fifty years or more old. It is a model A-4. The iron works well. I just want to replace the cord. How do I take it apart? I am...

try to open the terminal box then loosen the screw for line 1 and then the line 2 if you replace the cord see to ti that you wire installed is the same size on old wire.to avoid over loading.

Feb 25, 2011 • Sunbeam Irons

0answers

Iron does not heat, get hot

Be the first to answer Nov 25, 2010 • Sunbeam Steam Master 4222 Iron

0helpful

1answer

Our sunbeam iron got hot scorched the cloth and then stopped heating up. There was a smell of something burning, but a precursory search showed no burning.

Hi,
Here is a tio that will help you ....
many times the problem is in the thermostat..

Electric Iron not Heating Up or not Working Right
http://www.fixya.com/support/r5300202-electric_iron_not_heating_up_or_not

heatman101

Aug 19, 2010 • Sunbeam 4039 Iron

0helpful

1answer

Have a brown gummy substance on soleplate and just water will not remove? It's a sunbeam 4268 with some sort of coated finish. Lost the manual but sunbeams site says to wipe with cold water if starch build...

You could maybe get the Sunbeam 4268 manual here again.

Apr 02, 2009 • Sunbeam Heritage 4264 Iron with Auto...

0helpful

1answer

Sunbeam iron 4214

My iron leaks when I fill it past the fill line, so make sure you're filling it only to the fill line.

Nov 06, 2008 • Sunbeam 4214 Iron

0helpful

2answers

Open Iron

on most common IRONS , theres a screw located on the back where the main cord is , underneath it , AJ

May 15, 2008 • Sunbeam Classic 3957 Iron

Question 2

Anonymous

Contributor 1 Answer
Posted on Jun 11, 2011

Anonymous

Contributor

Joined: Jun 11, 2011

Answers

1

Questions

0

Helped

4059

Points

4

I just took apart a Sunbeam iron. This is how it disassembles:
first remove the screw at the base. Next remove the moisture dial top (it should just pop off). This allows the iron to slide apart - the metal base from the top. It should slide about an inch then lift off.

My iron didn't get hot, and what I found is the gear that attaches the temp setting to the electrical was missing a tooth. Perhaps you could set the gear to permanently "ON". In my case I found out with brute force how the iron is supposed to disassemble... time for a new iron...

Answer 2

Tammy Loiselle

Contributor 3 Answers
Posted on Sep 18, 2015

Tammy Loiselle

Contributor

Joined: Sep 18, 2015

Answers

3

Questions

0

Helped

1929

Points

8

There is a plus and minus button that's how you turn it on ...my problem is mine won't stay on so if anyone can help me with that I would very much appriciate

Related Topics:

My wife's sunbeam microglide iron does not get hot. What could it be the problem?. Mauricio. Thanks.

2 Answers

Anonymous

Tammy Loiselle

Add Your Answer

Attachments: Added items

Related Questions:

Sunbeam iron model gcsbcs-212 troubleshooting unit keep turning off while ironing

I just took apart a Sunbeam iron. This is how it disassembles: first remove the...

Sunbeam iron 5900 2400 watt not become hot. Now what can I do?

Sunbeam steam iron model #GCSBRS-1 does not give steam. 11/2yr old

My wife has a Sunbeam iron handed down from her Grandmother so it is possibly fifty years or more old. It is a model A-4. The iron works well. I just want to replace the cord. How do I take it apart? I am...

Iron does not heat, get hot

Our sunbeam iron got hot scorched the cloth and then stopped heating up. There was a smell of something burning, but a precursory search showed no burning.

Have a brown gummy substance on soleplate and just water will not remove? It's a sunbeam 4268 with some sort of coated finish. Lost the manual but sunbeams site says to wipe with cold water if starch build...

Sunbeam iron 4214

Open Iron

Not finding what you are looking for?

4214 Iron

Sunbeam iron model gcsbcs-212 troubleshooting unit keep turning off while ironing

Ask a Question

Top Sunbeam Irons Experts

Cindy Wells

ADMIN Andrew

Ngoro

Are you a Sunbeam Iron Expert? Answer questions, earn points and help others

Manuals & User Guides

. 4214 Iron Manual

Related Topics:

My wife's sunbeam microglide iron does not get hot. What could it be the problem?. Mauricio. Thanks.

2 Answers

Anonymous

Tammy Loiselle

Add Your Answer

Attachments: Added items

Related Questions:

Sunbeam iron model gcsbcs-212 troubleshooting unit keep turning off while ironing

I just took apart a Sunbeam iron. This is how it disassembles: first remove the...

Sunbeam iron 5900 2400 watt not become hot. Now what can I do?

Sunbeam steam iron model #GCSBRS-1 does not give steam. 11/2yr old

My wife has a Sunbeam iron handed down from her Grandmother so it is possibly fifty years or more old. It is a model A-4. The iron works well. I just want to replace the cord. How do I take it apart? I am...

Iron does not heat, get hot

Our sunbeam iron got hot scorched the cloth and then stopped heating up. There was a smell of something burning, but a precursory search showed no burning.

Have a brown gummy substance on soleplate and just water will not remove? It's a sunbeam 4268 with some sort of coated finish. Lost the manual but sunbeams site says to wipe with cold water if starch build...

Sunbeam iron 4214

Open Iron

Not finding what you are looking for?

4214 Iron

Sunbeam iron model gcsbcs-212 troubleshooting unit keep turning off while ironing

Related Topics

Ask a Question

Popular Questions

Retractable cord

Sunbeam steam valet instructions

The controller on my heated mattress pad blinks

Electric Blanket Control Blinks

Need to clean my sunbeam steam iron and can't find

Top Sunbeam Irons Experts

Cindy Wells

ADMIN Andrew

Ngoro

Are you a Sunbeam Iron Expert? Answer questions, earn points and help others

Manuals & User Guides

. 4214 Iron Manual