I am having trouble hooking up my dish network to this tv

We would be happy to help with those two issues. First let's address your DISH Network remote to your Emerson TV. To check that the code works try severalfunctions on the remote to make sure it's the best code to use with your TV. Rememberthat some codes may not be compatible with your equipment. If this is the case,try the other codes listed for that device until you find one that iscompatible with your equipment. Remember to put your remote back into SAT mode once you're done.

Once you have your DISH Network remote programmed to your TV getting the game system to come up on the TV should be a matter of getting your TV on the input you have it connected to. This can be done by pressing the "TV/Video" or "Input" button on the DISH remote when it is in TV mode. If you are still having trouble with getting the game system to come up on your TV, call the Emerson Customer Service Department at: 1-800-256-2487.

We hope that this information gets you up and running. Thank you for being a valued DISH Network customer!


Phillip Chang
DISH Network Customer Service Representative

It would be our pleasure to help you get your TV connectedwith your DISH Network equipment. How we are going to connect the receiverdepends whether you have a HD TV or standard definition TV. I would recommendvisiting our "How to set up receiver" web page:http://www.dishnetwork.com/SupportSection/setup-receiver. Hope this helps andthank you for being a valued DISH Network customer!


Phillip Chang
DISH Network Customer Support Representative

Hello there!!! There are a few reasons this could be. The first step would be to check how the hd is set up on the receiver. Press Menu 6-8. You will want to make sure that the Tv Type says 1080p. If this does not work, make sure that you are, of course, using an HDMI cable, or component cables. If you are having any other troubles with this, you can e-mail me at [email protected].


Becki Barned
DISH Network Customer Service

The output of the Dish Network box should be hooked to the input of the VCR.
The output of the VCR should be hooked to the input of the TV.
The VCR should be on channel 3 to record. Select channel to be recorded on the Dish Network box.

It sounds like you have Dish Network box output hooked to TV input.
& VCR output hooked to an aux. input on the TV.

Hi,

Please check the bellow links related to your issue:-

http://www.ehow.com/how_4868326_hook-up-dish-network-satellite.html

http://www.howtodothings.com/electronics/how-to-hook-up-a-dish-network-satellite

Please get back to us if you have any further query or else accept the solution.

Thanks for contacting fixya.com

I am hoping that you have gotten this resolved. But if not, or if you have trouble in the future, here are some simple steps to run through. If you are at TV1, the location where the receiver box is, then you want to make sure that your tv is on channel 3 or 4. Depending on what cables you have, the tv may also need to be on an input, such as video 1 or 2. In this case, it sounds like 3 or 4 would be sufficient. If you are in TV2, where there is no receiver box, you want to make sure that your tv on channel 60 or 73. Hope this helps!!

Becki Barned
DISH Network Customer Service

Ok your dish network wont play through the LHT854? Which Dish network receiver do you have 211, 311, 625, 612, 722? From the owners manuel for the LHT854 it looks like you can only hook up the audio from another source by an optical cable, so how is the LHT854 hooked up to the dish network receiver?

should go from your satellite to dish box might say sat on bck of box then the next [connection think says tv that should go to tv itsself or dvd vcr whatever ur hooking up to it then from that point hook it to ur tv

Hi first of all are you using scart leads to plug into each device here is how it should be set up ok
1. Scart lead from dish network into vcr
2. then other scart from vcr into tv
3. Now ti recieve the signal from the dish network you need to have the telly on the right av channel so that its picking up the signal from the vcr.
you can test this by changing the channel on the vcr controll or direct via buttons on vcr.
If the channels change then your on the right av channel.
Now when your on right channel on telly you need to now make sure dish network is on and on a channel or press the tv guide button just so you know what your looking for when the picture comes through.
You need to press av on the vcr controll this will then pick up the signal from the dish network via the scart lead as av is the channel for scart lead.
say if you was recording from dish net to vcr you would put the vcr on av to pick up the signal so press av on vcr controll this should then allow you to watch the dish network with no problems.
Let me know if you still cant and ill assist you further if it dont work tell me what you have done so i know how much you have done ok

go to channels and then go to auto search wait the time it'll find one channel and there u go u have dish..