It wont go on aux video - Televison & Video

First make sure that the AUX option is not set to off. Press A.Menu and then Initial Menu. Then select Aux1 or Aux2. Set this to match the type of device connected to the Auxiliary port, (The options are video, audio and OFF.) (When not in use, these should be set to OFF.)

Then press the Source button and try to set the Source to AUX1 or Aux2. If it still doesn't work, make sure that your device is connected to the jack. If that doesn't help, try a different device cable to connect to the Aux jack.

I hope this helps.

Cindy Wells

Select aux on the selection button.

'Aux' is a general label for any Line Level analog stereo input like DVD, VCR, TV, DBS, etc. They are usually electrically identical and interchangeable except for PHONO.

V-Aux on this unit is on the front panel for conveniently connecting a video device. It has analog and assignable digital audio plus S-video and composite video.

There is nothing labeled 'Aux' on this unit.

get a programable remote program it and just simply switch it over to cable or hit video it should do what it's made to do

CLICK HERE for your owners manual in PDF format.

The Aux jack is set to OFF by default on this model.
Please see page 8
ADJUSTING SETUP ITEMS for instructions on how to toggle the AUX jack "ON"

Press and hold SELECT button to enter setup mode.
Press SELECT button until AUX appears.
Rotate the volume knob to toggle the setting to "ON".
Press and hold the select button to return to play mode.

Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.

This unit does not have iPod video capabilities only audio, If you want to view video from your iPod you can get a universal cable that would charge it and also give you a audio and video output, this cable needs to be powered and grounded and hooked up to one of the radio audio video inputs. This link will take you to it. http://cgi.ebay.com/ALPINE-JVC-PIONEER-SONY-Aux-Input-Cable-for-IPOD-VIDEO_W0QQitemZ370164615429QQcmdZViewItemQQptZOther_MP3_Player_Accessories?hash=item562f87c905&_trksid=p3286.c0.m14&_trkparms=66:3|65:15|39:1|240:1318|301:1|293:1|294:100

Make sure that "AUX" is turned on on the menu. Some Pioneer radios have a front aux, a rear aux, a rear steering wheel control jack, and an aux through the IP-BUS only. First, make sure that if there is an auxillary port on the back of the unit, that it isn't the steering wheel control plug by accident. Second, front auxillary inputs on Pioneer radios NEVER need to be turned on in the menu, only inputs on the back. Any back inputs are turned on in the main set-up menu when the radio is first turned off. Hope this info helps.

when its on standby hold the menu button and then use the right nob to change aux on then press menu again and src untill aux shows. hope this helps

Put the signal into another input on the receiver. Any one will do except "phono"

well if thats a digital fet it wont work with aux in just the dvd player in it onl;y plays that settings usally how it is