Most of the time the sewing machine is giving you skipped stitches , thread ... Lowering of the thread tension helps sometimes.
Nesting on wrong side (bottom) is usually a top thread tension too low or no tension. Do a top thread tension test. This model has a horizontal spool so be sure the spool cap is larger than the spool and threaded per machine instruction. See Brother website.
It sounds like it has not been correctly threaded or the tension is too tight. Check the tension discs for bits of thread that may have broken off and be causing a blockage.
Re-thread the top threads making sure the pressure foot is up before passing the thread through the tension discs!
Then check the bobbin is running correctly by pulling on the tail of the thread. The bobbin should rotate clockwise. Put the bobbin case in and make sure it is seated correctly.
If all this fails try replacing the needle. A blunt needle can cause all sorts of weird problems
6,776 views
Usually answered in minutes!
×