Hp compaq d530 CMT motherboard diagram

check ur motherboard manual

you have 2 small wires connected with piece of plastic on motherboard , close to that says" bios pass" take that out ,that plastic and you won't have password on bios , or turn off computer , take it off electricity power and take out battery from MB and press button for starting few times to drain electricity that is left on power supply , then get back everything and you won't have pass , hope ti helps

if you are planing to connect the front panel cables..is better if you send me some pictures in order to asist you better...jesus_andre20 at /////h///o////t///m/////a///i////l/////.////c/////o//////m///
....

you can easily download the setup from the following sites
forums11.itrc.hp.com/service/forums/questionanswer.do?threadId
h18000.www1.hp.com/products/quickspecs/11632.../1163
h30499.www3.hp.com/t5/...PCs...HP-d530-CM
ptf.com/vga/vga+hp+compaq+d530+cmt
www.topshareware.com/...hp-compaq-d530-cmt.../downloads
www.user-guides.co.uk/download/hp/hpcompaq/hp-compaq-d530-cmt-manual-placa-
download and install it on your device,it will work just be fine

Most mother boards are loosely speaking "one size fits all". The newer the board the smaller generally. You will have to offer it up and see. It may mean you have to move a couple of pillars.
So long as the PSU leads fit, it sholud be OK.

its simple.. open your computer and remove your cmos battery located on the motherboard ..

kindly follow the link below you can get the Hp compaq D530 manual it will helps you
http://www.user-guides.co.uk/download/hp/hpcompaq/hp-compaq-d530-sff-motherboard-manual.html

http://images2.icecat.biz/img/gallery/3412399_5713.jpg

Answers to your questions:
1. Yes
2. Very likely
3. a Google search should show you what the connectors look like.
4 HP/Compaq do a good job of providing documentation. Go to hp.com and put in your system information. You should be able to locate motherboard diagrams there. If you can't let me know and I'll try to locate them.

Here is the link to the pdf file you want.

Any problems/questions? Please don't hesitate to comment back to me.

Regards,
Worldvet