Not pairing I have the virginmobile slider phone (it is called the"slash")  and it is not wanting to pair with my motorola H350 bluetooth headset.  I called virgin mobile for help, and their tech could not figure it out either.   I thought this particular model of bluetooth was a "universal" bluetooth ?

Hi,
Turn your H350 on by pressing and holding the black "Talk" button on the side of your headset. Hold it until the blue status starts to flash. To turn the H350 off, simply hold the talk button until the headset turns off.

Pair your headset with your cell phone by entering into your cell phone's bluetooth menu--Menu > Settings > Connection > Bluetooth Link > Setup (see Resources below).

Put your Motorola H350 into pairing mode by holding the "Talk" with the device turned off. Hold the button until the status light on the side of your headset begins to flash, and turns back into a solid blue.

Back in your phone's bluetooth menu, choose the option to "Search/Discover" bluetooth devices. And when your phone recognizes your H350, select the headset and enter "0000" as the passcode.


Thank You

Turn your phone's bluetooth on. Press and hold the call button on the headset until the phone detects it. When prompted for a password enter 0000.

all default passkeys for all headsets is 0000

Pin code for the majority of Bluetooth is 0000.

Try video instructions on connecting Bluetooth headset to Nokia phones on www.HandBookLive.com under Electronics category (Motorola H710 headset). It should be pretty much the same for all headsets. Watch chapter on Pairing phone to headset (Nokia example) It shows you the steps and what the phone screen will look like on your phone as you go through the steps (activating Bluetooth option on the phone, then searching for devices (headset) and finally pairing the headset with your phone.

for more clear instructions go here
http://www.motorola.com/mdirect/manuals/QG-H300_9495A08A.pdf

With the headset power off, press and hold
the Call button for 6 to 10 seconds until the
blue indicator light turns on and remains
steadily lit. (The light will flash while you
hold the Call button.)

If the indicator light is flashing or does not
remain steadily lit, turn off the headset and
repeat step 1.

Before you can use your headset, you must
pair (link) it with your phone.

Step A - PUT HEADSET IN PAIRING MODE
Note: To turn off headset, see "Turning On and Off" on the
reverse side of this guide.

PAIR
Your Phone
Select (Menu) > Settings > Connection >
Bluetooth Link > Handsfree > Look for Devices.
The phone lists all Bluetooth devices it finds.
Select Motorola H300.

Press OK or Yes to pair (link) the handsfree
device.

Enter the passkey 0000 and press OK.
Note: Passkey cannot be changed
from 0000.

Step B - SET THE PHONE TO LOOK FOR
YOUR HEADSET

When your headset is successfully paired

After pairing goto optins and connect with the BTHEADset.

Follow the link. It will take you to the Motorola support center. It explains what to do.

http://www.motorola.com/consumer/v/index.jsp?vgnextoid=1cdd4e3cfc35a010VgnVCM1000008206b00aRCRD&ps=y&pg=PG_TYP_00003&show=globalSupport&productID=c1df9f85dc575110VgnVCM1000008206b00aRCRD

All you have to do is-------- hold the call button on the bluetooth (make sure the bluetooth is off at first) hold it untill the light turns on steadily not flashing but steadily. now it is in pairing mode go to the phone turn on bluetooth, and go to handfree. now press add and it will search and hopefully pick it up.

P.S i had the same problem until i tried holding it longer :D

Hi, follow the steps to get your product paired. Step A - PUT HEADSET IN PAIRING MODE Note: To turn off headset With the headset power off, press and hold the Call button for 6 to 10 seconds until the blue indicator light turns on and remains steadily lit. (The light will flash while you hold the Call button.) If the indicator light is flashing or does not remain steadily lit, turn off the headset and repeat step above. Step B - SET THE PHONE TO LOOK FOR YOUR HEADSET Select (Menu) > Settings > Connection > Bluetooth Link > Handsfree > Look for Devices. The phone lists all Bluetooth devices it finds. Select Motorola H350. Press OK or Yes to pair (link) the handsfree device. Enter the passkey 0000 and press OK. Note: Passkey cannot be changed from 0000. When your headset is successfully paired with your phone, the blue indicator light changes from steadily lit to flashing. additional help http://www.motorola.com/mdirect/manuals/QG-H300_9495A08A.pdf all the best sreejith 2 Step A - PUT HEADSET IN PAIRING MODE Note: To turn off headset