I have mislaid the manual for my 8.0 megapixel Canon Digital IXUS 8015 camera and I would very much appreciate it if you forwarded a replacement copy please. I will pay by Visa card. My email address is [email protected] and my mobile number is 0879136886.Thank you.\r\nBest regards, Kevin Conroy

Is this information not contained in the camera manual ? If you have no manual, you can download a manual for almost any equipment by Googling the make and model followed by the word Manual, then follow the appropriate link(s).

Try using iMovie. iPhoto and some other photo cataloging programs are great at dealing with photos but they don't do videos. That's what iMovie is for.

There is no card limit mentioned but as far as I know it support 32GB SD card. But in case of video capacity it supported only 4gb in a single clip.

You can find the user manual here:
http://www.nodevice.com/user_manual/canon/digital_cameras2/powershot_sd1100_is__digital_ixus_80_is.html

The download is actually towards the bottom (with a code for you to enter)

yes , you go on canon.com/customer/support.
select tour model your done
regards Allan

SD cards top out at 2GB. The IXUS 80 IS is compatible with SDHC cards, 4GB and larger.

The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.

Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use iPhoto or any other photo cataloging program.

Its a one way street...from camera to computer...not the other way around. Doing that will eventually corrupt the card and sometimes even the camera.

Hello, my canon us 8015 has just come back from repair , the lens would not open , i have been told this is a common problem on this model , is that correct..? thanks

No error messages are listed in any of the manuals.

Maybe try the Canon website ?