E16 - Canon PowerShot G9 Digital Camera

The e16 error code indicates that there is a problem with the machines door lock.

I appreciate your post, Deejanae!

I see that your Frigidaire dryer is displaying an error code of "E16". It appears that "E16" is an invalid code. I would recommend performing a reset on your dryer and you can do that by flipping the household circuit breaker off for at least ten minutes. If you continue to experience an issue with an "E16" error code I would recommend contacting a professional technician for proper diagnosis and repair. This will help you avoid any unnecessary part purchases. -Matt

How to Reset waste ink counter (Error E16)
1. Unplug power and USB cable.
2. Open door and hold power button.
3. Connect power.
4. Close door, then release power button.

Hope it helps.

Error E16 mean commonly you cartridge must be reset (something Runout), press for 5-15 second for reseting each of cartriedge.

E16 is for an "open circuit" on the heater.

E16 indicates a motor lock with the inking motor. Disassemble the ink pump unit and check for proper rotation of the inking motor itself. This error is caused by a current overload.
Also, remember to try powering on the machine while holding down the reset key to clear all error codes first.

E16 must be "Ink remaining unknown".Press and hold the "resume" button for 5 seconds.

E16 says that remaining ink is unknown, E19 is empty. You can press resume to print, but you should replace the ink.

try this PRESS STOP BUTTON FOR 5 SEC CAN FIX THIS PROBLEM

after that will adicated light alarm blinking them you can print if can't try turn off printer and turn on again.

press stop reset button for few seconds and you can use your black cartridge for printing,but do remember to put use black only setting in ur printer cartridge settings.