SOURCE: memory card cannot be used
Follow these steps: 1. If you have a SD card reader, insert the SD card and look for it in Windows Explorer. In this case, mine was labeled F: 2. Right Click on the drive for the Card Reader (IMPORTANT) and choose FORMAT. 3. Format card with default settings. 4. Turn Camera on and go to MENU> FORMAT CARD 5. Before answering the next question, insert SD card into camera. You will hear it beep twice. 6. Choose FORMAT and the card should be formatted for use on the camera. Cheers!
SOURCE: Connection to Rolleiflex SL2000F SLR
I checked out a SL2000F that had good pictures on eBay. I see a standard hot shoe on the side of the camera. That being said, neither a standard shoe connection nor a pc outlet will give you TTL on the Metz. TTL is Transistor to transistor logic (or for camera store people, through the lens) A sensor that reads the light from the actual plane of the shutter is required to allow the Metz to give TTL operation. It will work on the Auto setting, but the Rollei does not have the sensor as described.
SOURCE: Rolleiflex 3003 Battery Pack
where i can find the battery back, for 3003 the batteries can refield
SOURCE: I require a replacement battery cover for a Rollei
Hello. Contact the folks at this link, an excellent source of Rollei parts http://www.kurlandphoto.com/?gclid=CIKfsNK6hKMCFUJx5QodikBwbA
J.
SOURCE: How to format sd card for rollei prego da5? I put
The DA5 works with SD cards. Your 4GB card is actually an SDHC card. While it fits into the slot, it is electronically incompatible and will not work. You have to use SD cards, 2GB and smaller.
103 views
Usually answered in minutes!
×