I have a Belkin Wireless G Plus Router connected via Ethernet cable to a Scientific Atlanta cable modem supplied by Virgin. I can't currently get any signal from the Belkin to my MacBook Pro (I've got it connected directly to the modem at the moment). I've tried pressing the reset button, disconnecting all cables and restarting, to no effect. Any suggestions? Cheers. Fred.

Solution:

Step 1:
Make sure the that router is connected to your modem with an ethernet cable via the router’s internet (WAN) port.

Step 2:
Unplug the modem from its power source and make sure that it's totally turned OFF. Then re-plug the modem to the power source.

Step 3:
Unplug your router’s power supply, wait for 10 seconds and then plug it back in. This will cause the router to reestablish communication with the modem.

If you still cannot browse the web, contact your Internet Service Provider (ISP).

Solution:

Step 1:
Make sure the that router is connected to your modem with an ethernet cable via the router’s internet (WAN) port.

Step 2:
Unplug the modem from its power source and make sure that it's totally turned OFF. Then re-plug the modem to the power source.

Step 3:
Unplug your router’s power supply, wait for 10 seconds and then plug it back in. This will cause the router to reestablish communication with the modem.

If you still cannot browse the web, contact your Internet Service Provider (ISP).

Solution:

Step 1:
Make sure the that router is connected to your modem with an ethernet cable via the router’s internet (WAN) port.

Step 2:
Unplug the modem from its power source and make sure that it's totally turned OFF. Then re-plug the modem to the power source.

Step 3:
Unplug your router’s power supply, wait for 10 seconds and then plug it back in. This will cause the router to reestablish communication with the modem.

If you still cannot browse the web, contact your Internet Service Provider (ISP).

Site reference link:
https://www.belkin.com/us/support-article?articleNum=56519

Seems to be that you have cable modem from Scientific atlanta.

1. Turn off the modem and the router.
2. Connect the modem to router with ethernet cable on internet port
3. and computer to router's port no 1.
4. power up your modem and wait for 2 minutes
5. then power up your router and wait for 2 minutes and try to go online on computer.
6. If not , then reset your linksys router by pressing your reset button at the back of the router with help of a pen for 10 sec.
7. then follow the steps again 1 to 5
8. try to go online.
9. if still not , the open up a browser on computer
10. type 192.168.1.1 in the address bar and hit enter on the key board
11. leave the user name blank and type admin in the password box
12. click on subtab of mac address clone under set up tab
13. click on enable and click on clone my pc's mac tab.
14. then click on save settings.
15. and follow the step 1 to 5.

Theencryption key secures your data from unauthorized access. The router's password is a Passphrase or the WEP or WPA orWPA2 encryption key. The Passphrase generates the WEP or WPA or WPA2 encryptionkey and this is in the router's wireless settings. To connect to your wireless router, configure the router'swireless settings ie SSID, plus the WPAor WPA2 encryption key and then configure wireless cards in the laptops and orcomputers with these router's wireless settings. Then the laptops and desktopcomputers can communicate with your wireless router.

It is possible .. just get youself an ethernet cable .. connect one end to your router and the other end to the back of the pc ( ethernet port ) .. and u will be connected via the wire.. You can disable the wireless connection from the router for that you can either call your Internet service provider or the netgear support team.
All The Best!!!
Please come back to vote, it would be a great appreciation for me and boost my determination to help so that I can keep on helping.
Zooless

belkin routers are compatible with all ISPs.... all that it requires is an ethernet cable that should come from ISP, either directly or through modem... so if your virgin connection gives you an ethernet port in their modem, you can configure the belkin router accordingly...

Wellll....since it seemed an impossible task, I tried the next best thing.
I bought a wireless adapter for the other pc and voila! they are on the internet, and I am returning the router.

Westell modem + Verizon DSL w/usb = No connection to router.

Huh? You installed Vista through your Virgin Cable Modem? What on earth does that mean?

Are you trying to ask "How do I install my Belkin Wireless G Router?"

If that is the actual question, here is the answer:

1) Unplug your cable modem from your computer.
2) Plug the cable modem into the router using a Ethernet Cable.
3) Plug the router into the computer using another Ethernet Cable.
4) Plug in the power supply for the cable modem and then the router.

(If your cable modem is ONLY USB, and doesn't have a spot to plug in a Ethernet Cable, you'll have to call Virgin and replace the modem with a model that does)

Once everything is up and running, you should be on the internet as soon as the computer starts.

(You may want to log into the router and disable the "Wireless" settings if you aren't using them to stop others from gaining entry to your network)

If you switched ISP then you have tor reconfigure your router according to the settings of your new ISP.

Verify which MAC Address U have Cloned. MAC Address of Your PC WiFi and Cloned One must not be same otherwise it will not work...

please be specific, what exactly is happning???