I HAVE A MODEL MGR57650D0 AND I CANT CHANGE THE TIME IT ONLY DISPLAYS "5A6" WHAT CAN I DO

It is not 5a6... it is Sab... (Sabbath mode)

Hello Susan Krim,

If you do not have your MODEL NUMBER
(nothing came through with your question)...

Find your original OWNERS MANUAL...
and look up how to DEACTIVATE the SABBATH feature...

ELSE...
Get the model number and go to my
favorite FREE manual site...
ManualsLib Makes it easy to find manuals online

Hope this helps... Next week too...

Carnac the Magnificent

u cant reset those , u have to change the counter chips .These are available in market

power down the unit at the circuit breaker for an hour or so and see if this clears the memory,otherwise try pressing stop/cancel or any combination of these types of end buttons at the same time to cancel the error message

Hello, welcome to FixYa.

It sounds like the unit has been placed in "sabbath" mode somehow, hence the display showing the digital abbreviation for sabbath "5A6".

If you have you owners manual it should instruct you how to disable it, but if you don't have it you will need to confirm the make/brand name is a Maytag and model number and I'll see what I can find.

I'll watch for your reply and if you need anything further I'll be glad to help in any manner I can.

Regards,

Macmarkus :)

Have you checked the "button" battery (CR1616) under the big battery? Probably needs replacing.

i need unlock code for Vodafone n96 model type 246 to unlock my phone

Page showing Woods timers and models:
http://waterheatertimer.org/Woods-timers-and-manuals.html

Add a comment with specific model number and I will help.

Instructions below are for Woods 59203 24-hour digital timer:
Plug timer in until battery is recharged.
If display will not show, then timer battery is dead and needs to be recharged, or timer may be broken.

Set current time:
Press and hold CLOCK button.
Press HOUR and MINUTE to set correct time with am and pm.
Press Day button to set current day.
Release clock button.

Program timer:
Press PROGRAM button until "1 ON" displays. This is program1 ON.
Press MINUTE and HOUR buttons to set ON time for program1
Press DAY button to choose day or group of days for program1 ON

Press PROGRAM button until "1 OFF" displays. This is program1 OFF
Press MINUTE and HOUR buttons to set OFF time for program1
Press DAY button to choose day or group of days for program1 OFF

Press PROGRAM button until "2 ON" displays. This is program2 ON.
Repeat steps above to set ON and OFF time for 5 programs.

When programming is completed, press CLOCK button to exit programming.
Press ON/AUTO/OFF button until Auto displays.

Are you pressing 0 to change the word normally it would come up with a list of alternatives

My range showed a code of 5A6, I held the clock key down for a few seconds and it corrected itself.