I need a Janome overlocker manual for a EZY.Lock404D as my mother lost hers

Janome ezy lock 604d.

Link below has several videos of using your machine:

Google

here is a link to one that is for a small investment in adobe pdf format

Go to Yahoo or Google and type the name, model, and serial number and manual. You should get a list and you can copy it and print.

Hi Morehu, this Youtube video will help you with your problem:

https://www.youtube.com/watch?v=tICJdFZ7IxY

It doesn't look like there is anywhere to get this manual for free. But you can buy it for $15 from a website.

http://www.sewshop.com/Janome_Sewing_Manual_304D_PDF____-8-4312-8710.html

The manual can be found at the following link:
http://www.retrevo.com/support/Pentax-EZY-manual/id/565bh035/t/2/

on my overlocker, its the screw in the front; it obviously works by pushing onto the needle head. Perhaps you've loosened it too much ?

how to thread the 404D Janome, lost booklet with instructions

www.janomestuff.com answer it all

Although the tension units on your machine are of a different configuration, always thread from the right spool first and then each one to the left.........ONLY in that sequence !


now take a look at this sewusa site for a better view of the actual routine through the thread guides.........as I say, the tension units are different, but the sequence is the same, just use the image from above to see which one is next........this chart, just as the one on the fold down cover of your machine need to be followed one thread at a time from R to L

If you want any more help with this, just post back here, or, drop a line through the "Contact Us" page at www.bargainbox.com.au